Youtube daily report Sep 2 2017

For more infomation >> 【海賊王】877話 最令人感到意外的10個情節 你絕對猜不到 - Duration: 2:20.

-------------------------------------------

Volkswagen Touran 1.4 TSI Comfortline (NAV./Climate/Cruise/Trekhaak/PDC) - Duration: 1:01.

For more infomation >> Volkswagen Touran 1.4 TSI Comfortline (NAV./Climate/Cruise/Trekhaak/PDC) - Duration: 1:01.

-------------------------------------------

Johny Johny Yes Papa

For more infomation >> Johny Johny Yes Papa

-------------------------------------------

Volvo V60 2.4 D6 AWD Plug-In Hybrid Summum - Duration: 0:56.

For more infomation >> Volvo V60 2.4 D6 AWD Plug-In Hybrid Summum - Duration: 0:56.

-------------------------------------------

La science dans... Dark Crystal [#32] - Duration: 7:44.

For more infomation >> La science dans... Dark Crystal [#32] - Duration: 7:44.

-------------------------------------------

19.不可能💍 - Duration: 5:02.

For more infomation >> 19.不可能💍 - Duration: 5:02.

-------------------------------------------

Anycubic kossel Effector Replacement (clone of original) - ITA Sub EN - Duration: 7:48.

Hi guys

than .. we come to final step

to solve precision problems

of the kossel

after .. arranging

the carts

after arranging the rods

continue to print bad

to the end, we come to

the Effector

this the original

I print only the first 2 layers

for ..

check if the measures are corrects

see this little windows

that are in the center of holes

of this

... emm than

if see here .. it are at the center of screws

here in the center and here a bit over

see here

the side on bottom are at the center of the screws

this a bit down and this a bit up

and we come to this

see the windows that full cover the screws

means it's crushed

if here are around same measures

this is crushed

and I not surprise that is the z axis

that is the ... nothing ..

in any case depends on all three axes

than .. I made a copy of the extruder ... emm

a copy of the effector

printed in ABS with my old printer

this is original extruder

well .. now I assemble it and we'll see how works

well ... we finally reached the correct print measures

now

I show the difference of the prints

before the last mod

I using this as reference .. that has correct measures

I print this before the mod

see here ...

was printed compressed

before the last mod

the objects that are less than 5 cm .. were compressed

and the objects that are bigger than 5 cm ... were expanded

this was printed after mod

ans finally .. I have the correct measures

this are by 80 mm

and I show ..

this was printed with old printer .. and is the reference

see ..

see here ..

and here

deform a bit the object

this .. printed after the mod

is ..

practically ..

perfect !!

than ..

I'm happy

all works good ... the carts works very well

the effector resists to the extruder heat

the cooler works well

after 2 ours of print

if you touch beside .. near the extruder ..it is cool

this first round of modifications are finish

the Effector and the Carts, you can download from my thingiverse account

I add link in description

for now is all

to the next ..

bye