An Giang info: Youtube daily report Jan 21 2019

Hello to my creative people, we started this year with lots of energy and full of

new ideas to develop and so on this new year we will put to work

all that creativity that we have every one of us, I want to take advantage of

opportunity to thank also all the people who have given us

accompanied during all this time that have made this community grow, the

Art Community in Your Hands, because We are 200 thousand subscribers, we hope that this year

be many more with the help of you, so if you have not subscribed

Remember to subscribe in the red box and also activate the bell so that

you get the notification of each new good video friends now let's start with

this project that I know you will like

good friends for this project we are going to

need a clay tile (clay tile) in this case I will use a recycled tile (used)

but you can buy the new one or recycled then we must clean it very

well with a wire brush we're going to rub we must cover ourselves with a

masks so that this dust does not affect and we should leave it then that

very clean and to work it should be completely dry ready then we should

let it dry very well if suddenly it is wet, we will also use

cold porcelain then in my country it known as porcelanicrón but I do not know in the

of you then let's use minimum 500 grams of cold porcelain already

with this then we can start our project

before starting to work in our tile we must make a mark to make

some holes then we're going to mark from this extreme inward 5

centimeters and from this part to here let's mark 3 centimeters has the

mark where I'm marking is the narrowest part because the tile

it usually has a narrow part and here a wider part ready then

the top is our tile is going to be the narrow then here we go to

mark on both sides to make a hole this I do not know here also mark

in 5 centimeters and 3 centimeters of top down now with the

screwdriver (screwdriver) what we are going to do is just place it in this brand and

let's start spinning

if we do it continuously not we must not do too much pressure

so as not to break the fabric we just continue this

is going to make the hole this too can be done with drill bits, with drill

then suddenly for the people who they have the drill they have easier

elaborate it like this in this way let's hold by the back

and so this hole is made here still I have not finished but you can see

how is it doing good friends here I already made the holes

look how they are well distributed what only was that the big ones a little

because at the beginning I made the holes with a smaller screwdriver (screwdriver) is a

flat-tip screwdriver then I used another thicker one and enlarged

the holes a little bit more because I'm going to place a thick cord that resists the

The weight of the tile must be taken into account that then we must place a cord

resistant so that the tile is not go then it will not burst the

cord and the tile will fall when we have hung then let's take

50 centimeters of cord I usually recommend a cord

nylon and we will introduce it by the part of inside

we passed it in front

at this moment we tie a knot in this we're going to make a knot like that

the two cords together we help this way

this is a knot that is very safe is not going to let go and

then we will run the cord towards an end so that the knot that in this

part will not be hidden and the other cord we are going to be so that

we stay like this so plan ready then this part must already be left and now yes

we can start working with the porcelain throughout our tile

well then now let's start work with the porcelanicron

it's cold porcelain a separate piece but let's take

more quantities I will start to work the roof tile from the bottom up

way you can do in the order you prefer

it can be from bottom to top of top down does not matter then

let's take a good amount for work part of here

this remember that this material should be

covered When in contact with the air, it starts to

toughen we must have it covered the one that does not

we are working then we are going to knead

and we are going to start making a roll

It's a good amount

so he has manipulated the tile has been messed up a bit but this really

it does not matter because we are going to paint it

we must have a clean surface

then we are going to stretch it until I managed to cover all this part

trying to make it uniform

we take the measure, ready so it is already Now what we are going to do is flatten

a little with a tube

we try to flatten

So this way, it will stretch us a bit but not

matter after having flattened it then that

we are approximately one centimeter thick this we're going to

paste in this part for that we're going to use white glue and we're going to

use here to join this piece then we are going to apply in this part

an excellent fix remember that the tile must be clean before

work it, wipe it with a damp cloth and let dry again then let's go

to paste here in this part

is left over then we're going to cut let's cut the piece of

surplus that we have left here, here they are too much two

how should it look like

we can tell a little

when we have this here united then we can start giving forms this

the porcelanicrón we must go working at once

we can use a spatula

a knife what you have on hand look there are pieces to work this

some appearance as if it were a floor

of stone

the creativity that you want to put to the project

then we are giving forms a taste like that

well after we already have this piece so carved as if it were a floor

of stone then let's take another little cold porcelain and we're going to

make another roll a long roll about us

is one centimeter thick and this let's cut

with several of these we're not just going to split into pieces

in four or five pieces, five pieces we should try to keep a

centimeter thick

and here we are going to center what we are going to have consider this part to take out the piece

so let's cut it into five parts

approximately these pieces have some 4 or 5 centimeters

we will make them pieces of 4 or 5 centimeters and we are going to

apply glue here whenever we are going to join we must

apply glue so that it fits

in the bottom in this part of here also

then we are going to stick a piece

later

again here

it does not matter if this is white after it dries up and you will not notice

and that brand

show more sunken to give us the appearance of a stairway seen

has this last part apply we have

well after having already the ladder list now let's take out two pieces in

triangle shape and we're going to stick on the ends of the stairs in

this part

what are you going to do Like the

the handrails for calling him from some way or a piece to place here already

give us more decoration

we are arranging the pieces we are going joining a little more

This is how this part of the stairs

good now to continue with this part what we are going to do is take a

little porcelain and let's take out small pieces make small spheres and

we're going to start hitting each side ready then let's apply

here the glue

and in this way we are going to start place so we go flattening

taking out larger small pieces we are going to put it this way

let's do all this in these two extremes simulating as if they were

pure rocks

that's how it looks like this

well here already after having stuck this part of rocks then I made a

shape of a door is the way that I did and then the waist with this

instrument we must build get a

instrument with a flat tip that is rather

I need to start carving then we're just going to start shaping

to each of the pieces that we go placing then here I made the form of

the tables that which are composed of the ready door

and this is also going to be done like the lines that wood has

then we can start to carve superficially to give it a

little more realism to all the pieces that we are going to paste

this in the same way always applying the glue before placing

each piece then likewise we go to make the windows

to make a balcony and all this I'm going to overtake and I'll show you which one will

be the result as it is going to be ...

good friends as with the door

so here I already took a similar form to the door but smaller they go to

be the windows on the sides, ready then what we do is what we do

apply the glue on the part of back here we apply the glue

directly and we will locate it in where we want it to be

without doing much pressure you know and likewise

we do with the other window we apply glue

and now we can proceed to to give them the ways to carve the

let's paste it what equitably what

more or less in the same line of the other side

with the windows thus proportional again then with this instrument

an instrument that you have tip that so be it plan then let's start

shape

it's carved, giving a little depth

and we are going to take out the shape of the window, ready then here in this piece the

product if we want we can draw well

or as you want to do it you notice that it forms a bit

they simply fit it with their finger again

that's what we're going to do and here in this part of the top we follow

with the same decoration of the door

so in this sequence

this is a job that really takes enough time to elaborate it then

I'm doing steps ahead to that the video is not so long

so we're going to suddenly give a little more detail if it's here in these parts

we do as the form or the veins of the wood

a few lines and when we go when this is dry and

let's go paint then we will see a little more real

well here then I'm done hitting the windows detail them and also you

I placed a small strip of cold porcelain and carve in the same way as

I did with the door giving the appearance of that they were stones ready to give a

similarity to the door now for the windows I cut these two pieces are

flat pieces simulating as if they were two wooden planks and I also did

the carving as if they were, as if see the veins of the wood then what

we are going to paste here in the same way that we have done with all the other pieces

applying the glue and we're going to paste here

well look how are the windows with this piece stuck I also hit him

two small rolls in the part of down as if it were logs of wood and

Now I'm working at the door of the balcony then here I already have the door

cut and carved then again they I always show using a

instrument with tip and plane so with this we are going to do that

shape then again we are going to apply the

glue

well the back

we are going to place it that is centered we must remember that we are going to hit the balcony

here then let's leave a space in the downstairs

and if a roll to stick it on the edge to do this same effect

we apply the glue in the same way

this is what we are going to locate

now we proceed to carve

it's very easy like working with play dough

taking into account more or less where is the same cut on the other side

and we give continuity to the edge

to make it look more real

and then we are going to press a little

just a little bit that we're going to crush too

and this is how this piece is now let's work on the balcony

well then for the balcony what let's do is take out a piece

flattened so more or less than about three centimeters wide and we're going to have in

mind that it covers the same distance from that of the balcony door

or stick out a little more just a little this then now we are going to present it

nothing else to put it like that and we're going to press to give us the curve of

this part

by force of suddenly if they see that it is deforming a bit we fix it but

so this is essentially to give this curve

so now what we are going to do is drink

some sticks or a skewer stick and We are going to cut pieces of 4 centimeters

long our pieces are going to introduce in this part that will form

the balcony so, let's go

to introduce them for let this be him

The handrail

and from our balcony consider

the pieces that we cut

and here in the back

we look at how far it will be introduced

and place the stick or if necessary or it is not necessary to place it ready

for example in this case if they want can put a stick behind but then

it is not totally necessary here and after we will apply it

we are going to apply glue to fix it there but then to these pieces like

we already made the guide we can remove it apply a little bit of glue can be

the stick or directly there and we're going to enter again after having

already this armed as well as is then as I mentioned, we hit it

and then we roll a strip and we are going to paste it in this part giving the

turn to fix it to this window of life's boat

good friends here then it has already drying a bit more the project takes a

day drying up then I want to show you what I have done

and see here in this part above I did a bigger strip and I flattened it to

cover the part where the rope was this after doing that then I did

a smaller roll and I pasted it here Look, I stuck this

about a centimeter and a half to the bottom, not totally here flush with the

tile but a little run down this is in order to glue the tiles

I'm going to use some techniques that they are made and they sell them with

clay tiles like that in miniature then these tiles are going to

hit if suddenly you do not they can get them done with the

same cold porcelain, ready then these tiles later on then

we are going to stick them here in all this part then why from this piece

a little lower so that when the we paste that in a little falls we're going

to paste a strip like this in this position and the other one we are going to paste it in

the opposite direction so to form the roof here, well then

then as I was telling you this has already been dried one day it has been drying then

now with such a pointy instrument as the one who was showing them what

I do is remove some pieces for so they look like this look here in the

window I already did the process and here in the I also did the door on the balcony

principle of I forgot to mention them before pasting is this part if you remove

a bit because then it was going to be a bit difficult to remove that part in here

up if we can do it the same shape

so what we do is simply take the tip-toe instrument

and we are going to introduce it strong in the part in the parts where we want

remove this then this usually I do it like that because it has dried

so when I do this, it's not going to damage the pieces of immediately having

watch out

and I will stay and the exact way as I want

this is no problem to withdraw because this is already a bit dry then

let's say and we have pieces left so we do not we want to just polish it

look at how it came out easy so I do it if you say

nothing because I did not do it from the principle because

when I do it this way then the pieces will be exactly as the

brands

here the piece for example of this piece that are like

wood then I totally remain straight and with all with all the carving

what did I do ready then I retire here of the windows of the parties here

up from here the other window we do the same and here in this part

Well, we are going to remove what are the glasses for calling it from some

way and this part of above this I what I do like this or if you do not want to do it

in this way then what they do is make thin rolls and stick to make

this way do not paste this edge first and then paste and do this way

so as I say, I have the exactly square shape how do I want that

stay friends at this point I have already left to dry

one more day the project then is already totally ready for us to start

paint before that I wanted to show you something extra that tells you look at I elaborated

this this pipe that comes from the drain of the roof and I also made these parts

to simulate the moorings that hold the pipe

and as seen here at the tip with a punch I pressed him to make it

like you this is red because I ran out of color porcelain

white but it does not matter because we're just going to paint and it's not going to be noticed

In addition to this I made two lamps very easy lightbulbs simply

we take a rectangle with some pieces flat also on the top and

below we make it independent join with the glue and we hit two

little balls is here I made some pressure to give the appearance of

little windows of the lamps are the let's stick here to the side and side but

when we have already painted the walls and I also did on the number plate

the house we are going to paste

as we say let's first paint the just like the roof the roof tiles

we are going to paint them we are going to paste them now paint at the end this if you

they want to paint a different color or they can leave the natural color

then now let's start painting our house

to start painting our project what we are going to do is apply a base

of black color to all the pieces that we elaborate ready to everything we did

in the cold porcelain, except the base of the tile,

the tile is not going to be painted black then we are going to apply this base

absolutely all these pieces including also the headlights that

we did and the only thing we painted is the plate

this is going to apply another color

So in this way, suddenly if we can spread a

little tile but does not influence much but we must make great emphasis on everything

what is the slots all the slots mainly this in these pieces as well

which are from this the edges of the door, from the windows

Everything is painted black

ready after having already applied the black base on all parts

look how we have to have emphasis quite in all the slots as they

had said this as you see now what we are going to do is

apply the tone that goes on the wall to this I will use a bone white color and

we're going to need a brush it should be flat and begin to apply it in everything in all

the part that corresponds to the tile let's apply like this

trying not to smear too much the pieces that we have already painted

black and we are anointed a little no matter

then let's go through all that surface that is tile

for the windows or what he's going to do all that is the glasses here in this

part of the door and in the part of above the balcony door in this

then we will use a blue color sky with a small brush

then we are going to paint these parts is getting

Special care not to stain too much as I said

now after having already painted this and that is dry let's apply a tone

gray in everything that corresponds to the rocks what is stone to all

edges of the windows from here the balcony and the bottom part also together with

the stairs this then we're going to do with the dry brush technique

we are going to apply to spread the brush and we are going to unload in a cloth (cloth)

brush like that we are going now, if we must have

Special care not to go on a lot of spreading the other piece because we're going to

paint with sienna color, a brown color so let's apply it like this

if the stone has the slot or where we see the slots then we go to

apply in this sense but in the opposite direction to be able to enhance

where was this we are doing it so we can go

smearing a little bit of the cloth on which we unload

and we are doing it smoothly and slowly

until we can enhance all this figure and with the color

siena or light brown let's do what same

then this is going to be for the parties where the wood is, we also unload

and we're going to apply for example in the door as the door I did the

veining or carving in this sense then as I had mentioned in the

Wrong Way so let's apply a little more

pressure we already follow

we continue spreading the brush

the plane can be a round brush but then not very big this

to apply it like this ready friends here then I'm done

apply the dry brush technique in all the parts that we would enhance

ready the gray color in what was the stone

and the color siena or light brown in all what is wood

here it enhances all the carving that already we had done the forms are very

all right apart from this then apply a little

red wine color on top continue as is is how we apply a

black base then we have a little left veined with the same technique that we did

here we do not need it to be with a brush dry so that the color does not remain

completely flat and the pipe is left it was simply enhance a little this

part ready friends then now what are we going

to do is apply a little color yellow

let's use yellow with the same technique a little bit here in the brush

take off a cloth we must discard it very well

this yellow is simply to give a small made on all edges

we are going to apply it in the outline of the windows

look at the door ready like this

it must be tenuous

for this part too

we do not need to apply too much in the brush we are simply going to

give it in the contour of for example here at the door in all this part of the

upstairs the balcony in the windows in the part of here above

also and a little here by this edge of The pipe

well I have finished applying the very dim yellow color look how it gives

an enhancement to this tone so that we do not the color is so even so full

so what they do is so that it is now what we are going to

do continuing with the roof then here you can see that

I have the tiles what I did about taking the tiles and paint them, apply them

red wine color if you wish stop them from this natural tone of how

you want or paint it another color then first let's place the

first course with the tiles in this position this with the curve as well

a ready channel I painted this part

on the edge at the bottom if you want to paint it complete it

can then we will start to paste it from the end we're going to

paste straight in a sequence so that I will use then the silicone

hot let's apply

silicone here at this extreme and on this day here

A) Yes

should be with very good silicone to that we are not going to take off

So what we are going to try is that let us stay

and the right to follow the sequence It has been twisted because then it loses us

sequence

after having stuck is isolated in this position then we are followed

to paste the other what in the opposite direction

suddenly we could separate it a little bit ready for him to go around the curve and

soon you have to separate it a little and when we paste it, we're going to let

stay the same let's say this output a little

we must continue to stay in the same position

good friends after having this isolated as I was mentioning them

then the other look at the other one paint it on the upper part of the lower part

do not paint it for these tips also, that is, paint them

someone at the beginning or before to be Easier manipulation of the tile

because the complaint is a bit heavy then if you want you can hit

the tiles and then paint it but then well we have already painted

then in this what we are going to do is to apply the silicone here in the center

and we're going to stick it in the union He passed

then it would be left of this shape

let's complete this and continue with the project

good friends here and the tiles were left lists look at how they look now

I'm going to do is paste some pieces that elaborate for the part that you saw

they were the lanterns these lanterns the let's stick here to side and side too

the plate on the house number and the ring that is from the door

and then these I'm going to hit with white glue we are going to apply and the

let's stick in your position apart from that here you can see it stick

a plant buy or I got a plant artificial and from this then cut

a piece to stick it on this side and I will also use this plant to

make small pots, cut some small pieces and

I introduced in this in these pots that really are some tapas that you use

I'm recycling too some toothpaste caps can

also use saucer caps this sauces display

here use 2 larger lids to make some pots and this is spike

wheat use a wheat spike and the tip will

We cut all these hairs and we apply green paint ready then

they are ready to be pasted here at the entrance of the house but before

paste the pots what we are going to paste first person these pieces that

I mentioned them at the beginning and after have stuck these pieces

let's apply a varnish I use Generally a water-based varnish

but you decide what to apply they want spray but I recommend them more

a water-based varnish then this plant if I hit it first because

I needed him to have good grip and ready

then I stuck it first and then by the sides as the varnish what

we apply with a brush then what we can varnish like this on the sides with

very careful we are going to varnish what totally and after that then

we are going to stick the pots and let's stick with hot silicone

good friends and that's it's over our project

look how it looks here and I hit the pots and applied the varnish throughout

the project can see the tiles were already

varnished also

I hope you liked this project suddenly I will make another tile

I liked it a lot so I'm going to take it out another new idea, friends thank you very much

for joining us and we see each other here with more

Art in Your Hands

For more infomation >> Como decorar una Teja de Barro Paso a Paso - Duration: 40:58.

-------------------------------------------

Compile and Execute C code in Notepad++ - Duration: 2:01.

hello in this video I will show you how to compile and execute C code in notepad

plus plus so for that you will need mingw compiler installed in your system

Then go to plugins plugin admins. Here we need to install a plug-in named NPPexec

select that hit install this will ask you to reboot your notepad plus

plus hit Yes

this will take few seconds there we go so when you go to plugins you will find

NPPexec and click on that or either hit f6 you will find the text box is

empty here so you can copy the text from the description of the video then hit

save and put any name you want I'll just put letter C for C programming

then hit OK and it will run the program and to compile and run the program and

it will open the command window for you

so I have a program written here and I included a library called con

input/output dot H and I used our inbuilt function getch() to pause the program

and it will require keyboard key hit to continue and will close the command

prompt window thanks for watching the video guys

For more infomation >> Compile and Execute C code in Notepad++ - Duration: 2:01.

-------------------------------------------

Absolutely Beautiful Luxury Custom Craftsman - Duration: 2:48.

Absolutely Beautiful Luxury Custom Craftsman

For more infomation >> Absolutely Beautiful Luxury Custom Craftsman - Duration: 2:48.

-------------------------------------------

Tandoori Soya Chaap Tikka Recipe | Street Style Chaap Recipe - Duration: 7:13.

For more infomation >> Tandoori Soya Chaap Tikka Recipe | Street Style Chaap Recipe - Duration: 7:13.

-------------------------------------------

和田アキ子、Mr.シャチホコと入れ替わり! 初ひな壇でものまね - Noticians 24/7 - Duration: 1:04.

For more infomation >> 和田アキ子、Mr.シャチホコと入れ替わり! 初ひな壇でものまね - Noticians 24/7 - Duration: 1:04.

-------------------------------------------

Como decorar una Teja de Barro Paso a Paso - Duration: 40:58.