Hey everyone, I'm Matthew aka Punky Vapes
Today I'll show you my first video review
I'm going to show you the Vsticking VK530 kit
Vsticking is a new vape company using a catchphrase
Fair Price Luxury Products
Let's not waste any time
I'm going to show you what's inside the packaging
The User Interface, the Menu system
and I'll tell you everything I think about it at the end of the video
So here we are to open the packaging of this VK530 kit
Let's check what's marked on the side
Everything included is marked on it
Here we have one of the two protective stickers included, both for the battery door
a warranty card
a user manual / product specification
It's going to help you understand the user interface
the subohm tank/overall specifications and some keybinds with the joystick
Two spares Sillicone orings
USB Cable for Charging and Firmware upgrades
The VK530 J-Graffiti-Silver
We'll see more details about it later on the video
Spare NI80 mesh coil head
0.10 ohm
Spare Replacement Glass Tank (standard 2ML )
And the subohm tank included in this kit
Let's have a closer look at this VK530 box mod
Dimensions are: 92.5mm Height 48.3mm Width 34.6mm Depth
Very nice and big plateform around this 510 pin
Most atomizers will sit flush on it (30mm and there is still some extra space thanks to the 34.6mm Depth)
Here we have the battery door, spring loaded locked and secured with this press button
No movement on this battery door, very solid
Very easy to notice the positive and negative as it is marked in a different color
I think this is really helpful to make this contrast so the + and - are very visible
Let's put the 18650 batteries inside by respecting the positive and negative indicators
We can see here the contact pins inside the box are spring-loaded
Very very nice finish quality on this box mod
Device starting, perfect
So, what can I tell you about this box mod
Let's start the device by doing 5 clicks on the fire button
Powered by YiHi SX530 Chipset
Beautiful TFT IPS HD Screen
this box is going to accept resistances from 0.15ohm to 3.0ohm in Standard Mode
and from 0.05ohm to 1.5ohm in Joule mode (TCR)
Output power: 200 Watts max
Output voltage: 1.0V to 9.5V
There are a lot of similarities with what we've seen on some other devices using a YiHi Chip
Joystick for navigating and doing the settings,
by pushing it up and down, left and right or by pressing the center
Nice fire button here, very reactive
I just did 3 clicks on the fire button which locked it
Let's rotate so you can see this graffiti drawing
Very nice job here, which I already saw when I did an unboxing video of this device
I wasn't talking but showing everything with a background track
and I was already impressed when I did that unboxing video, by the finish quality of this box
some people may not like the graffiti style but I really like all those details
you can feel those black lines with your hand,
this embossed surface which is really well done
I've checked all differents kind of patterns that should be available
If I'm not mistaken there is a Gunmetal, a black and a gold version (for the frame)
A different graffiti pattern and a Camo/Camouflage version
From all the different patterns available, this one is my favorite
Now we are going to check the subohm tank
just moving the mod in the back
here we have the Mesh subohm tank
Dimensions are 45.75mm Height and 27mm for the diameter
510 wide bore drip tip
compatible with any other 510 drip tips
the top fill
with 2 nice juice holes to fill it
The threadings/finishs are really really good
we have the preinstalled coil head here
which is Kanthal 0.2ohm
Mesh wire
I don't think you can really see the wire inside
Even closer
you'll most likely see the coton only and barely the mesh
even with the light we can't really see it
But it is indeed a mesh (and they stated the composant on each coil)
I'll just put the my juice inside and let it saturate a bit, try it
and tell you my thoughts at the end of the video
I'll test it for decent amount of time
As there has been some very good subohm this year
Something I didn't showed you is the airflow ring which has a stopper on both side
nice tension on the airflow ring, not too tight , not too loose and it doesn't spin
I really think the finish on the subohm are very good too
let's not forget the replacement coil head included
Ni80 this time, mesh too and 0.1ohm
which gives you a replacement when your first is done
like the Kanthal for exemple, when it's used you have the replacement
or if you don't like Kanthal you can go straight on Ni80 and vice versa
or if you are following the power recommendations
for each coil you have a best power recommendation by the brand
I think it's 30w to 70w on the NI80 but I forgot it might be the Kanthal
I'll check later for that
But it gives you a good idea of the coil you might want or need
So here we are on the display/user interface
on the upper side we have a speedometer showing 0 to 200 watts
on the lower left side, we can see the battery indicator with just on top of it the battery voltage: 7.76volts
Manual TCR in blue, for temperature control usage only
in the middle, M1 which are memory mods in order to keep your settings saved inside your mod
on top of it, wattage indicator: 35watts
on the lower right side of the screen, we have the resistance value: 0.40ohm here
on top of it: 3.74 volts which will fluctuate between your wattage power and resistance value
so right now it fires at 35 watts / 3,74 volts
If I press the joystick on the right side
you can see here in blue we are in soft mode which is one of the 5 modes available
we can switch from Soft to Standard mode,
Powerful, Powerful+ and SXi-Q-S1
I'm going back on this mode as I've pressed to fast it went back to Soft Mode
It's a power curve mode, nothing more, nothing less
you can set the wattage of your device and adjust it each 0.5 seconde
this will allow you to customize your vape experience according to your needs
You can do an increasing or decreasing power curve
so you can fire at a higher wattage in order to give better heat to your coil
and then decrease it to achieve the wattage you want
so if you want to vape at 60 watts for exemple
but you want to fire at 70 to ramp up even faster
you can start your curve at 70 and then dicrease each 0.5s as fast as you want
So now let's go back in Standard Mode as I don't need to use the other modes
If I push the joystick on the left side, I can change the memory modes,
here we have M2 set to 30 watts, M3: 25 watts, M4: 20 watts and M5: 200 watts.
Whatever I change on a memory mode, will be saved inside the device
wattage, joule or anything else
It will stay saved in the memory mode you are using
Everything I'm changing now on M1
I'm lowering my wattage to 34.7w
if I scroll all those mods and get back to M1, by doing some small press on the left
I just scrolled from M1 to M5 and I'm getting back on M1: I'm still at 34.7watts
if I shut off the device and power it back in 3, 4, 10 days...
M1 mode will still be at 34.7 watts
if I press the joystick in the center
we have the wattage mode,
Joule mode,
celsius degree (or fahrenheit) and then we're back to wattage mode.
if I press the joystick on the left side for 3 secondes
well here I was too fast
there is a Novice Mode which will remove all those customizations
like the Temperature Control
so if you just want your device to work in wattage mode, nothing more, nothing less, you can use this mode
pressing on the left for 3 secondes again and I'm back in Advanced User Mode
which is the mode with all customizations available like Standard Mode, Powerful Power Curve ect...
3 clicks on the fire button and the device is locked.
we can see the clock showing the time and date
pressing the fire button, nothing happens, it's locked
3 clicks again and the device is unlocked
and now it fires as intended
5 clicks and we are in the menus system
So now inside the menus we have system off
one pressure on the right or left of the joystick to select
here we can shut off the device, up or down to switch between those options
so I'll select system on, to stay inside the menus
Adjust date time
to set the date and time
navigate with the joystick to change what you want
up or down to change the value, right or left to move to the next value
here we can change the date format, one pressure to validate and we're out of this menu
Adjust temp: for Temperature Control usage
You can set from 100° to 300° (212°F to 572°F). If you're not using TCR again, you're not going to use this.
as Adjust Unit
which allows you to switch from °C to °F and vice versa
Select coil: Sooner I showed you on the display
it was marked in blue in the lower left side: "Manual TCR" because this menu is set in Manual TCR
but if I don't to set my TCR manually
I can use presets available on the chipset for Ni200 (nickel), Ti01 (Titane) and SS316L (Stainless Steel)
I'll stay in Manual TCR
Setting TCR: This is related to the Manual TCR Option
I can set the TCR value 0,00700 being the max, and 0,00050 the minimum.
You set this value according to the type of wire you are using.
this value will be different
Compensate Temp: Still for Temprature Control
you can add up to 50°C or disable this by setting this value to 0°C. (32 °F to 122 °F)
Standby Time: The time before the screen goes into sleep mode
Here it is set to 3 minutes (maximum) as I took some pictures of this mod
but if you press it down, it can be set to 30 secondes (minimum)
Brightness: Screen brightness value
it comes set to 5/10 which in my opinion is perfect
but if you want to lower the brightness, you can change to 4, 3, 2, 1, 0 and we can't see anything
let's raise the value now and if you want a brighter screen you can set it up to 10
which for me is really too much
but people might want or might need to increase or decrease which is nice give them the choice
As I don't need to, 5 is perfect to me
Wallpaper Select to change the wallpaper of the display
there are 10 wallpapers available and the speedometer count as one of the ten.
I'll show you all of the wallpapers available from 1 to 10
we're back on the wallpaper 1
the speedometer
Exit to leave the Menus system
Now the presentation's part is over, let's jump into the final thoughts
I will tell you everything positive and negative about it for me
The first pro for me is the overall build quality of the box
the graffiti itself and its texture
this embossed surface that you can feel with your hand
very nice to the touch
the mod is ergonomic and it is very easy to use and navigate with the joystick
The second pro is obviously the fact that it's powered by a YiHi SX530 chipset
a nice performing and very accurate chipset. Excellent for Temperature Control
We have differents vape modes, a good amount of customizations to make your vape experience better
I have to say I really like using it.
Third pro is the very strong battery door
nothing move, it's springloaded and locked by a push button
Fourth pro is the depth of the device, especially for the top side
34.6mm which means most atomizers and drippers will be flush with no overhang
Fifth and final pro is the mesh subohm tank included in the kit
I like the design, the overall build quality and finishings, the very good threadings
good quality threadings, you can screw and unscrew, it doesn't get stucked
510 drip tips compatible, so you can put any of your 510 drips tips on it
the mesh coils it comes with (Kanthal 0.2ohm and Ni80 0.1ohm)
I have a good amount of flavor and vapor production with it
as far as flavor it's going to be hard for you to judge
but I'll show you some of the vapor production
Nothing huge here, I'm using the Kanthal mesh, 0.2ohm and 45 watts
First con is about the Kanthal coil head only
I had a lot of leaking issues while filling the tank or putting it on its side even for a few secondes
for the first 48 hours
I've told Vsticking about it
and I also told them that since then it stopped leaking
I can put the tank on its side, vape, fill out with the airflow open or close, no leaking issues anymore
but I still mention it as a con because It happened, it was important for me to tell them, but also to tell you
as I intend to stay honest on everything that I'm testing, any issues I had with this kit.
The second con for me is still on the Subohm tank
I don't know if you were able to hear
while I was vaping on it
It's kind of loud on the airflow, almost a whistle sound but it's not
as I've tested some tanks that were really whistling
and it's not the same, but it is still doing some kind of weird sound
and we have to keep in mind that it is a single mesh tank
and it's not very rare to see that kind of sound with a single mesh coil subohm tank, no matter the brand
Now I'm going to talk about what I would have liked on this box mod
this is very subjective and this is my own opinion only
I had 2 very small regrets on this box mod
things that I would have loved to see on it
like on the customization part
we have 10 wallpapers available
the first being that speedometer display
so we have 9 other wallpapers picked by the brand
It would have been nice if we were able to import at least one wallpaper
with the SX software available
as we have the USB cable and the software
and we can't put our favorite wallpaper on it
a small regret that disappeared when I was able to find today the price of this mod
very fair price especially due to the quality and price of a YiHi chip
So I understand that we can't do it as we are here on the SX530 when the Gclass use the SX550,
less customizations but a much more affordable price
it's something we have to deal with
as if you want more customizations of that kind, with the same chipset, the price won't be the same.
A second very small regret in my opinion is about the appearance of the device
as we have only 3 differents choices: two different kind of graffitis and one camo
I think it's atypical and in my opinion it would have been nice for this company to offer
at least one classic skin
like some kind of paint or fake leather with a single color
in order to maybe please or reach more customers maybe.
Now we need to keep in mind that Vsticking is a new brand in the vape industry
this is their very first device/kit and I don't think they have the money to release a device
with a huge amount of colors/skins options
like some older brands
We are limited here to 2 different kind of graffiti and the camo,
and I admit that I would have been more be drawn by something very classic. (but this is my likings only)
I really hoped that you liked my first review
if you did please like it and subscribe to my youtube channel
if you have any questions, comments or feedback please contact me on my social medias
I'll put all my links in the description of this video
as Vsticking official links
and I'll see you very soon for another review.
For more infomation >> Hundreds attended Susan G. Komen Pink Promise event - Duration: 0:46. 
For more infomation >> 咒法寺 槍手 尾王 開啟字幕會有詳細教學 - Duration: 4:26. 
For more infomation >> 老婆和弟弟主演，兒子女兒當配角，導演：請不起別的明星！ - Duration: 2:35. 
For more infomation >> #Smite #Xbox #Android #Sub/Viewer Games !twitch to join - Duration: 3:18:19. 
For more infomation >> Life coming full circle in West Dallas for District Attorney J. Chris Hawkins - Duration: 3:27. 
No comments:
Post a Comment