Youtube daily report Jun 22 2018

- Pimp C has always been his own man.

When he'd make up his mind,

to do whatever it is he wanna do,

that's what he gonna do.

And I think if he was brought back to life,

he'd do the same thing all over again.

(Southern hip hop music)

I always viewed him as like, the Tupac of the South.

Outspoken, he could rap, he could sing,

he could produce.

He was multi-talented.

I heard the song Pocket Full of Stones

and I had just purchased a new Lexus vehicle

and I almost burned my motor up

going to Port Arthur

to meet with Pimp C and them

and convince them to sign to Rap-A-Lot.

They were signed to another record label at the time.

I was really discouraged about that

to a certain extent, but

what had happened from that meeting was

a bond was made.

And even though I couldn't sign 'em,

I extended my hand to be there for 'em

because they was from the South.

(Southern hip hop music)

Pimp sometime would

say the first thing that was on his mind.

I said, hey man, be quick to listen and slow to speak.

And I don't think he never really mastered that.

So that's some advice

you know that I gave him.

When it came to the beef and Master P,

my two friends, I definitely felt

I needed to step in.

Master P wanted to be respected,

and Pimp C wanted to be respected.

To get both parties on one accord,

where the subject of respect,

that was the solution.

Sometimes I had to kind of make him listen to me.

If you see a man about to run off a cliff,

if you his friend, it should be your duty to tell,

hey, you finna run off the cliff.

And if he seem to not hear you then you,

you stop him.

I inspired Pimp C to know that

I was that type of person.

Can only motivate a man to

not pour gas on a situation

but try and diffuse it.

(Southern hip hop music)

I saw no signs of Pimp death coming.

I explained to him how important it was to

come out and

stay sober, keep your mind clear.

You can say "I wish", "if", "I could", "I would".

But the reality of it is,

he's gonna do it the way he wanted to do it.

The main thing was gettin' focused

and gettin' some money.

As he got bigger,

more money, more problems.

And some of 'em change to that extent.

But,

he was the same dude, you know what I mean?

His character, his personality was the same dude.

He was real on the stage

and he was real off the stage.

For more infomation >> J Prince Discusses How "Respect" Played A Role In Pimp C's Beef With Master P | I Talked to Pimp C. - Duration: 3:15.

-------------------------------------------

More Big Cass WWE RELEASE Details! Sami Zayn OUT For Rest Of 2018! | WrestleTalk News June 2018 - Duration: 4:16.

For more infomation >> More Big Cass WWE RELEASE Details! Sami Zayn OUT For Rest Of 2018! | WrestleTalk News June 2018 - Duration: 4:16.

-------------------------------------------

Gare aux dards ! - ZdS#17 - Duration: 4:48.

For more infomation >> Gare aux dards ! - ZdS#17 - Duration: 4:48.

-------------------------------------------

Make Your Polymer Clay GLOW with Glow-In-The-Dark Powders-Friday Findings - Duration: 8:09.

Have you ever wanted to recreate glow-in-the-dark effects in your polymer

clay sculpting? Well, I have and the first time I tried it I was a little

disappointed in the results so I've looked into some other products and I

have a bit of a review and a demonstration for you of

glow-in-the-dark powders from poly clay play.

Hey there creative people, Sandy here, welcome to another Friday findings video

at keepsakecrafts.net. So a couple years ago I made these little lamp posts for a

tutorial for Polymer Café magazine. Sadly... there I am... Polymer Café has gone out

of print so I have been taking all of those tutorials and making them into

PDFs in my Etsy shop and when I revisited this project I remember that I

was kind of disappointed in these. I think they're absolutely adorable. I love

the way my sculpting came out. Well, let me show you what I mean by the

disappointment. I have turned off all the lights in my room and there's the glow,

it's pretty faint and as you watch it is fading, fading, fading, fading. It's very

sad and disappointing because these would be

so much fun to put out in a little fairy garden. Let me turn the lights back on...

and have them glow part of the night anyways, if not all night long, that would

be fantastic. So I looked into some other products.

First of all let me show you what those, what these are made out of. I used the

glow in the dark clay from this Sculpey kit it comes with four glow-in-the-dark

colors and it says it's six pieces but sadly two of the pieces are solid black

and solid white which I thought was kind of a bummer, but they're baked the same

way that any other Sculpey clay is as a rule, 275 Fahrenheit, 15 minutes per

quarter-inch, some are 30 minutes per 1/4 inch. One thing I do not like about this

clay was it was squishy. I remember barely getting these very,

very thin petals sculpted, they were just so difficult to manage, very squidgy clay.

I didn't enjoy working with it. So when now it's time to put up that tutorial

and I want to be able to suggest to the folks who would like to make one of

these for themselves a better alternative. If you want to know more

about glow-in-the-dark and all the science behind it Ginger Davis Allman

has written a really interesting article over at the Blue Bottle Tree and she

reviews some other glow-in-the-dark powders and tells you all kinds of

interesting things about it. I'm not going to do that today. I just have these

three glow-in-the-dark powders from PolyClayPlay. I have aqua, green and purple

and I'll show you my results. What I did was I mixed them all with some Pardo

translucent clay. You definitely want to mix these with translucent so that the

glow can shine through. It just wouldn't make sense to mix them with a solid

color. The directions on here say to mix one vial with two ounces of clay. I

didn't need to mix an entire package of clay and I didn't want to use all my

powders so it was kind of guesswork. So what I have here are a few samples this

is the Sculpey set, the four colors of glow-in-the-dark

that came in that set and this is samples of the Pardo. I think green, blue

aqua and purple that I mixed, and I mixed varying amounts of the powders. One thing,

I just reread Ginger's article today and probably should have read it before I

started playing because she made a great suggestion. These powders are very, very

drying to the clay, you can just practically feel it drying out as you're

mixing it in. It's tricky, it's kind of messy, you mix it in

and then it just gets all crumbly. Pardo is already a little crumbly. She suggests

adding some liquid clay or clay softener, which i think is a very smart idea, it

helps the powders stick down so they don't make such a mess and it helps keep

the clay from drying out. So for my first set of samples I just spread one, this is

the aqua so I'll just put that on here. I just spread basically enough that would

stick to my sheet of clay and then mixed it in, and and I'm not gonna

demonstrate mixing it in because you can, you can figure that out for yourself. For

the second sample I mixed in probably about a quarter of the vial, it's hard to

gauge from these because most of it's covered with this sticker but I mixed a

fair amount, probably a about a full scoop which is maybe half a teaspoon, a

teaspoon. I'm not being real scientific here, but I mixed a lot more in

one of these samples is what I'm trying to say. So, let me turn out the lights and

I'll show you the results I got from that. None of these are baked so the

effects would probably be more glow-in-the-dark because of course the

clay turns more translucent once baked. So you can see the ones in the middle from

Sculpey are definitely... they glowed and then they're immediately fading back you

can tell the ones that I mixed more in, they have just a slightly, ever so

slightly brighter glow with the exception of the purple which is glowing

a tiny little bit. You can see it against the white tile, it has the faintest glow

but it's not nearly as bright. The green is definitely the brightest and then the

aqua so you can see that the ones with more powder and in this lower row

are the ones I have more in. Let me just shake off

that over there. So you definitely, the more powder you mix in the stronger the

glow is that you get. I did find that after about an hour these were pretty

much all faded. So these glow-in-the-dark powders I would say are, yes, absolutely a

better alternative to the Sculpey set. If you already own the Sculpey set go ahead

and use the colors and you can just mix powders into them. Now I have not looked

into any of the other glow-in-the-dark products out there. I would be interested

in hearing what your experience is with them, what you've found what works.

There's paints, there's other companies that manufacture powders, there was

another one that I came across but they didn't say how long the

glow lasted . There's also tapes, there's spray paints.

So if you want to get your polymer clay to glow for a little bit longer you can

try using the powders. Use more for a brighter glow and this will just give

you slightly better results. So I hope that you found this helpful and

interesting. Again, I open up the discussion to you. I would love to hear

what you have to say and what your experiences are with glow-in-the-dark

products for your polymer clay or anything, really. If you're interested in

any of these supplies click on the little "i" card in the upper right of the video or

there's a link in the description box to go to my blog post where I always have a

supply list with links to products. Be sure to subscribe if you haven't already.

Take a peek at my Patreon page for how you can get bonus tutorials for yourself,

up to two every month. Thank you for watching, happy creating,

bye.

For more infomation >> Make Your Polymer Clay GLOW with Glow-In-The-Dark Powders-Friday Findings - Duration: 8:09.

-------------------------------------------

Golf Lessons to fix shoulder issues? Far more than a Golf Grip Trainer - Duration: 0:48.

You've had shoulder issues too did that help you with your

shoulder? It's been a life saver in that regard,

because, for whatever reason, when you have loss

of feeling in my right side and so what happens

is the right hand goes numb and I think that

creates a casting motion even more. When I can

hold that angle better I end up turning my shoulders

better, which put you can put me in alot more

powerful position, a lot more consistent position.

So when people say that this is just a grip aid,

what would you say? No way. I mean it definitely

helps you with your grip. If you wanna learn how

to grip the club properly, this is a great tool.

But it does much more than that. It sets the

angle at address it sets the angle at the top of the

swing and it teaches you the correct position and

impact umm that the best players get into it.

It teaches you a position where you can actually de-loft

the club and compress the ball. So it does a lot more than that.

For more infomation >> Golf Lessons to fix shoulder issues? Far more than a Golf Grip Trainer - Duration: 0:48.

-------------------------------------------

Dredging Corporation of India Recruitment 2018 | Latest Jobs In AP | Omfut Tech And Jobs - Duration: 5:00.

Dredging Corporation of India Recruitment 2018

Latest Jobs In AP

Omfut Tech And Jobs

For more infomation >> Dredging Corporation of India Recruitment 2018 | Latest Jobs In AP | Omfut Tech And Jobs - Duration: 5:00.

-------------------------------------------

ホンダ「S660」とスマート「フォーフォー」にリコール。センサやECU関連に不具合有り - Duration: 4:29.

For more infomation >> ホンダ「S660」とスマート「フォーフォー」にリコール。センサやECU関連に不具合有り - Duration: 4:29.

-------------------------------------------

What are impact Loads? - Duration: 2:38.

For more infomation >> What are impact Loads? - Duration: 2:38.

-------------------------------------------

Paul McCartney sings the Beatles' hits in Carpool Karaoke | American Today – 10 Amazing - Duration: 2:26.

For more infomation >> Paul McCartney sings the Beatles' hits in Carpool Karaoke | American Today – 10 Amazing - Duration: 2:26.

-------------------------------------------

Shakira Faces Backlash After Fans Compare Tour Merch Pendant To Nazi Symbol | American Tod... - Duration: 1:33.

For more infomation >> Shakira Faces Backlash After Fans Compare Tour Merch Pendant To Nazi Symbol | American Tod... - Duration: 1:33.

-------------------------------------------

Uptown Food Truck Festival Coming To 3 Cities | American Today – 10 Amazing - Duration: 2:37.

For more infomation >> Uptown Food Truck Festival Coming To 3 Cities | American Today – 10 Amazing - Duration: 2:37.

-------------------------------------------

Roseanne Is Coming Back to ABC Without Roseanne | American Today – 10 Amazing - Duration: 3:14.

For more infomation >> Roseanne Is Coming Back to ABC Without Roseanne | American Today – 10 Amazing - Duration: 3:14.

-------------------------------------------

VW「ゴルフ／シロッコ」等10万台以上の大規模リコール。既に1,000件以上ライト類が点灯しない不具合有り - Duration: 4:03.

For more infomation >> VW「ゴルフ／シロッコ」等10万台以上の大規模リコール。既に1,000件以上ライト類が点灯しない不具合有り - Duration: 4:03.

-------------------------------------------

Selma Blair celebrates 2 years sober: 'I'm a living miracle' | American Today – 10 Amazing - Duration: 3:04.

For more infomation >> Selma Blair celebrates 2 years sober: 'I'm a living miracle' | American Today – 10 Amazing - Duration: 3:04.

-------------------------------------------

Brooke Astor collection finds home in new research room at New York Public Library | Ameri... - Duration: 1:12.

For more infomation >> Brooke Astor collection finds home in new research room at New York Public Library | Ameri... - Duration: 1:12.

-------------------------------------------

How I Make Money Online

For more infomation >> How I Make Money Online

-------------------------------------------

Opel KARL ROCKS 1.0 S/S 75pk | NAVIGATIE - Duration: 1:06.

For more infomation >> Opel KARL ROCKS 1.0 S/S 75pk | NAVIGATIE - Duration: 1:06.

-------------------------------------------

Audi A4 2.0 TDI AUTOMAAT PRO LINE S Xenon Navi DAB Adaptive/cruise Sportstoelen Stoelverw. - Duration: 1:08.

For more infomation >> Audi A4 2.0 TDI AUTOMAAT PRO LINE S Xenon Navi DAB Adaptive/cruise Sportstoelen Stoelverw. - Duration: 1:08.

-------------------------------------------

Dj Quads - Let´s Float Away - Duration: 2:12.

Skylr Infinite

For more infomation >> Dj Quads - Let´s Float Away - Duration: 2:12.

-------------------------------------------

Le monde ne tourne pas rond - Le meilleur d'une semaine d'humour - Duration: 4:58.

For more infomation >> Le monde ne tourne pas rond - Le meilleur d'une semaine d'humour - Duration: 4:58.

-------------------------------------------

EN DIRECT - Brésil-Costa Rica (2-0): Le Brésil s'en sort par miracle! - Duration: 2:34.

For more infomation >> EN DIRECT - Brésil-Costa Rica (2-0): Le Brésil s'en sort par miracle! - Duration: 2:34.

-------------------------------------------

Toyota Verso-S 1.3 100pk Aut. VVT-I Aspiration/ Panoramadak/ Camera/ Climate control/ Tel. bluetooth - Duration: 0:53.

For more infomation >> Toyota Verso-S 1.3 100pk Aut. VVT-I Aspiration/ Panoramadak/ Camera/ Climate control/ Tel. bluetooth - Duration: 0:53.

-------------------------------------------

Mercedes-Benz AMG GT S - Duration: 1:10.

For more infomation >> Mercedes-Benz AMG GT S - Duration: 1:10.

-------------------------------------------

Everything about nozzles with a different diameter - Duration: 8:13.

The default nozzle size on vast majority of FDM 3D printers is .4 mm, a good middle ground

considering both print speed and the level of detail.

Changing the nozzle is pretty easy and it takes just a few minutes.

And different nozzle sizes can give you all sorts of advantages.

But in our survey just 20% of users answered that they have tried a different nozzle.

That's like buying a DSLR camera and never changing the lens.

It definitely works, but you're limiting yourself.

Smaller nozzles give you increased detail at the cost of print time and bigger

nozzles print fast, but not as detailed, right?

Well, things are not that simple and we're going to look at real-life examples to see when

to use what nozzle.

But first, we have to take a look at the relationship between the nozzle diameter and the layer height.

The nozzle diameter directly limits the maximum layer height you can print with.

A general rule of thumb is to keep the layer height below 80% of the nozzle diameter.

Go higher than that and the layers will stop bonding together well, because the nozzle

won't be squishing the current layer against the previous one.

Changing the nozzle diameter affects the resolution almost exclusively in the horizontal plane,

that is parallel to the print bed.

On the other hand changing the layer height affects the vertical resolution, so it's

mostly visible on the sides and angled walls of your models.

3D printing isn't exactly a fast process.

Even just a few inches tall print can take hours to complete.

So it's quite striking how overlooked printing with large-diameter nozzles is.

Larger nozzles lay down wider perimeters.That means that for the same wall thickness, you

won't need as many of them.

Larger nozzle also allows for greater layer heights.

Combining these two effects leads to a dramatic improvement in print speed.

However, printing a single perimeter vase will take the same time no matter the nozzle size

The printer still has to do the exact same sequence of moves.

But before we get into really fast printing, Let's start the examples with a smaller,

.25 mm nozzle As we said before, smaller nozzle increases

the resolution in plane parallel to the print bed, so it's ideal for printing of small text

As you can see, some of the letters on this 3D printed business card are simply too small

for the .4 mm nozzle, which is by the way already visible in Slic3r's gcode preview.

But with .25 mm nozzle all letters are printed well and are readable.

And just for the record, changing the layer height has absolutely no effect on the print

quality in this case.

Another use case for a smaller nozzle is printing jewelry.

With smaller nozzle you'll get clearer thin lines and smaller gaps in top infill.

And what about printing miniatures?

To be honest, the standard .4 mm nozzle already prints them pretty well.

Can you tell a difference between these two chests?

Where you're gonna see an improvement is if you need to use supports.

Supports printed with a smaller nozzle are thinner, easier to remove and leave smaller

marks on your print.

That's the main reason why the goblin from .25 mm nozzle looks better.

And what are the disadvantages of using a smaller nozzle?

First of all the print the print time will increase compared to the .4 mm nozzle.

The printer has to make more moves to lay the same amount of filament.

For example to make a 2 mm thin wall, you have to set 8 perimeters instead of just 5

with a .4 mm nozzle.

There's also increased risk of filament jams.

Dust particles and other impurities that are big enough to pass through .4 mm nozzle might

get stuck in .25 mm nozzles.

That also means that you can forget about printing with metal or wood fills.

So a quick summary. You get more resolution in the XY plane, better printing of text, jewelry,

logos and really easy to remove supports.

But you get longer print times, increased risk of filament jams and smaller range of

filaments to print with.

What if we go bigger than the standard .4 mm nozzle?

The .6 mm nozzle is, at least in our opinion, even more interesting than the smaller ones.

If your model doesn't have tiny details, it will be almost impossible to

tell the difference between .4 mm nozzle and .6 mm nozzle, but you'll shave off hours

of print time.

This flower pot?

Three hours saved, but that's at the same layer height for fair comparison.

Remember, with .6 mm nozzle you can print with much bigger layer heights and save even more time.

Voronoi lamp?

Almost 9 hours faster then with .4 mm nozzle.

And both of these little grim reapers took 3 hours using the same layer height.

I'm sure you can guess which one was printed with a .6 mm nozzle.

I think you get the point, it prints fast with a relatively minor decrease in print quality.

But wait, there's another benefit.

In the impact resistance test, models printed with .6 mm nozzle absorbed 25% more energy

than those printed with .4 mm nozzle.

The test was done as an average from 10 samples, ignoring the lowest and the highest value

in each series.

Hence the 8 samples in this graph.

Of course, small details, like these letters, look worse with a .6 mm nozzle.

And supports are more difficult to remove, which is probably one of the biggest drawbacks.

To sum it up, you get up to twice faster print times, similar quality as with .4 mm nozzle, more

durable prints and really low risk of a clogged nozzle.

But you get worse resolution of tiny details and harder to remove supports.

But, what if we go bigger?

One milimeter?

Yep.

Does your print take dozens of hours to finish?

With 1 mm nozzle you'll be able to finish in two to three hours.

Half a milimeter layers or even bigger than that.

I think I know what you want to say.

The prints must look awfull, right?

Although it's true that they do have a different aesthetic, with some models it's not a bad

thing actually.

This pencil holder took over 11 hours to finish with a .4 mm nozzle.

This one was done in 1 hour and 40 minutes.

And there's a surprising advantage when printing with a 1 mm nozzle, it rounds all sharp

corners automatically.

So it's perfect for printing for example child toys.

And you can print five of these dinosaurs in the time it would normally take to finish just one.

Single perimeter prints with transparent filament also look interesting, they make light refract

in a different way.

Okay so you get extremely fast printing, very sturdy prints, unusual look with tall layers

and basically zero risk of a clogged nozzle.

But your prints will lack detail, the highly visible layers might not always be what you

want, supports are really difficult to remove and also filament seems to just disappear

from the spool.

So… are you convinced that you that you should give different diameter nozzles a chance?

Even the original E3D nozzles, are just about 7 dollars.

This small investment can have a surprisingly large impact on how you print.

And how do you replace the nozzle?

We have a separate video about it that you can check out.

If you enjoy these videos, we appreciate if you leave a thumbs up and consider subscribing,

if you haven't already.

Happy printing.

For more infomation >> Everything about nozzles with a different diameter - Duration: 8:13.

-------------------------------------------

How modern day TV programs control our lives - Duration: 4:01.

How modern day TV programs control our lives.

Times have passed

since the introduction of the very first television series.

There was a time when watching TV helped people

increase their creativity by leaving them to imagine.

But now, the times have changed,

modern trends are used to market television production to the masses

Some of these content shares no credibility

or responsibility for promoting a lot of controversial

themes wrapped around incest

sexual frustration, sexual abuse and drug addictions

These are the very topics that leave us in a state of decay

where our minds will be blocked off towards

thinking in a better way towards creativity

distracting us from our life goals

leaving us as slaves to the Television

we are here to show about the negative

side of TV series addiction.

1. First, on our list,

they have managed to destroy our Creativity.

There are quite a lot of good TV programs

that helped us to imagine living in a world

of cartoons that we loved

Helped kids imagine a lot more and be creative

and pursue towards artistry.

Unfortunately, the times have changed

Children got no room to have a childlike mind that will give enough freedom

to be creative, as their favorite TV programs have been destroyed

to promote political and other ways of thinking patterns.

2. Second in our list

is about how they control our time.

Would you skip an important task or a responsibility

to watch your favorite TV show?

Then you are probably influenced by TV addiction

that has altered your thinking patterns

that will harm your life long and future relationships to come

We should only watch TV or play games

when we have some free time, not the other way around.

3. Third in our list is

because they make you feel unsatisfied with your life.

With a lot of gossip programs

that markets several individuals for their limelight

with the scripted lavish

unrealistic and fantasy like lifestyles to make you want to be like them.

Then you start to follow them as your main influencers.

You will never realize how much you have lost until its too late.

If you are a teenager growing up,

you will suddenly move to face the realistic society

to face the ultimate reality that will never allow you will find it hard to survive.

4. Fourth in our list is when pointless discussions

destroy our work progress

and duties rendered towards our employer.

Businesses and businessmen risk their entire lives

and organizations to be successful

and also to expand by hiring more employees.

It is your responsibility to complete your tasks

that ensure flawless functionality of a company

Do you find yourself trapped with work colleagues

talking about the net episode

while you have a ton of documents overdue?

If you do, then you are clearly addicted to TV.

5. Final in our list is about

how they promote political agendas over human decency.

TV is vastly controlled and financed by politics

as they continue to mind control

over your possible thinking patterns

blocking you from the freedom to think otherwise.

As this TV drama takes a large chunk of your daily priorities away,

you become unaware of your own surroundings

that will turn you into a political slave under the control of political lobbyists.

These are few of those ways that TV controls our life.

There are plenty more and how they have managed

to slow down the progress of humanity.

We hope you will be mindful of your schedules and priorities.

If you start to control your life,

your mind will be ready to support the desired success you seek.

Thank you.

For more infomation >> How modern day TV programs control our lives - Duration: 4:01.

-------------------------------------------

Est-ce un viol ? - Duration: 2:13.

For more infomation >> Est-ce un viol ? - Duration: 2:13.

-------------------------------------------

Gaz lacrymogène : pourquoi son utilisation massive pose question - Duration: 7:45.

For more infomation >> Gaz lacrymogène : pourquoi son utilisation massive pose question - Duration: 7:45.

-------------------------------------------

[Nouvelles] || Laeticia Hallyday, pourquoi elle ne paiera rien au fisc français ? ? - Duration: 1:34.

For more infomation >> [Nouvelles] || Laeticia Hallyday, pourquoi elle ne paiera rien au fisc français ? ? - Duration: 1:34.

-------------------------------------------

Learn colors with toy vehicles 30 minutes Toy Cars - Duration: 29:37.

Blue Forklift

Blue Penguin Car

Blue Ferry

Blue Go-Kart

with Bowser from Super Mario

Blue Car Carrier

Blue Tractor

Blue Train

Blue Helicopter

Kawasaki

Blue Tow Truck

Blue Racing Car

Blue Garbage Truck

Blue Truck

Blue Transformer truck

Blue Van

Blue Car

Blue Police Car

Blue Concrete Mixer

Blue Bus

Green Train

Thomas the Train

Green Road Roller

green concrete mixer

green transformer

green Tractor

green Pickup Truck

green Bicycle

green Tram

green Bullet Train

green car

green dragon car

green Excavator

green Melon Car

green Garbage Truck

Lego

Lego Garbnage Truck

green recycling Truck

green road sweeper

green dump truck

red motorbike

red icecream truck

red quad bike

red mail truck

red Forklift

red Tram

red Cable Car

red Concrete Mixer

red Van

red Transformer

red Bullet Train

red Billboard Truck

red Truck

red with Cars

Lightning Mc Queen

red Taxi

red Tow Truck

red Car

red Toy Cars

red Hippo Car

red Vehicles

learn colors with vehicles

red Racing Car

red Lego Racing Car

red Fire Truck

red Bus

red Train

For more infomation >> Learn colors with toy vehicles 30 minutes Toy Cars - Duration: 29:37.

-------------------------------------------

BENTLEY BENTAYGA W12 : PIKES PEAK ME VOILÀ - Duration: 5:14.

For more infomation >> BENTLEY BENTAYGA W12 : PIKES PEAK ME VOILÀ - Duration: 5:14.

-------------------------------------------

3969 RUCKLE -1 - Duration: 14:42.

For more infomation >> 3969 RUCKLE -1 - Duration: 14:42.

-------------------------------------------

Xiaomi Redmi Note 5 vs Xiaomi Mi 6 Camera Comparison [Eng Subs] - Duration: 9:16.

Hello guys! I am Vagelis Minas

and you are watcing the camera comparison video between Xiaomi Mi6

and Redmi Note 5

Lets start!

As i can see from the screens of the phones

that Mi 6 has more details

for sure i can't judge right now from the device's screens

this is your job

lets test

the autofocus

The RN5 has Dual Pixel autofocus

like the Samsung's flagships of the last years

I would like to tell me your opinion

I can't judge correctly this moment

I think we cover this topic

Again, I think Mi6 has more deatail

and dynamic range

Αlthough, redmi note 5 performs very good

on this part

I think it is time to test the stabilazation

Mi 6 has 4 axis OIS

Whilst, redmi note 5 has only EIS

Lets make a running

That's all with the video, lets see some photo samples

In good lighting conditions

in most shots it's hard to tell which of the two devices has the supremacy

With bokeh mode enabled, the result is clearly better at mi 6

While on both devices Slow motion video is quite mediocre

Lets test the devices on low light conditions

The difference is obvious to me and I believe, also to your monitors.

Redmi note 5 has much more noise that Mi6

The video's quality is not comparable

At least that's what I see from the devices screens.

You will judge this as well as.

Lets test the autofocus.

I think that...

redmi note 5 is faster, and thats because it has dual pixel technology

I think this sample is enough

The difference is obvious

Lets test the selfie camera

Again, I believe that redmi note 5 has more noise

Thats obvious as you can see

Lets see some photo samples

In low light conditions, although mi 6 is overall better, RN5 is not far behind

Selfies in both indoor and low light conditions, are better in redmi note 5

Summing up

the Mi 6 captures more details mainly on the video

it has more natural colors

better bokeh

and much better video in low light conditions

On the other hand, I noticed that in several shots

the RN5 has less noise in good light conditions

very good dynamic range

excellent electronic image stabilization

in some cases better indoor photography

while the paradox is that

while the photos with the front camera are better in all lighting conditions,

the video in the dark has more noise and less details

On the other hand, the video with the main camera is just average in good light conditions

and bad in the dark.

While on both devices Slow motion video is quite moderate.

If you want to support my channel

you can buy these devices on the link that you will find in the video description

So, that was the camera comparison between the Xiaomi Redmi Note 5

and the Mi 6

What are your thoughts about the photographic performance of the two devices?

Has the time come that budget devices can approach flagship performance?

Leave a comment with your opinion

and of course if you enjoyed the video

don't forget to like subscribe

and click the notification bell

so that you don't miss any of my new videos

For more infomation >> Xiaomi Redmi Note 5 vs Xiaomi Mi 6 Camera Comparison [Eng Subs] - Duration: 9:16.

-------------------------------------------

Tutto può succedere 3, trama seconda puntata: il turbamento di Alessandro - Duration: 5:30.

For more infomation >> Tutto può succedere 3, trama seconda puntata: il turbamento di Alessandro - Duration: 5:30.

-------------------------------------------

Tuto art-thérapie: changer de vie grâce au mandala (expérience véridique!!!) - Duration: 3:23.

For more infomation >> Tuto art-thérapie: changer de vie grâce au mandala (expérience véridique!!!) - Duration: 3:23.

-------------------------------------------

DE LA MAZDA MX-5 RF 2018 - Duration: 4:48.

For more infomation >> DE LA MAZDA MX-5 RF 2018 - Duration: 4:48.

-------------------------------------------

Mon dossier d'entreprise – S'inscrire à Mon dossier d'entreprise - Duration: 2:11.

For more infomation >> Mon dossier d'entreprise – S'inscrire à Mon dossier d'entreprise - Duration: 2:11.

-------------------------------------------

Le monde ne tourne pas rond - Le meilleur d'une semaine d'humour - Duration: 4:58.

For more infomation >> Le monde ne tourne pas rond - Le meilleur d'une semaine d'humour - Duration: 4:58.

-------------------------------------------

EVILSQUID vs. FAKE EVILSQUID - Best of Splatoon 2 - Duration: 5:19.

- We have ... ah finally! - Oh what is this?

- Well we meet Evilsquid, wow.

- Do you think it's the real one? Is this the real Evilsquid?

- I'm going to squidbag him.

- If I kill him, I'll squidbag him so he notices me.

- Let's rekt him.

- and he's playing roller this fu#*?%.

- Our goal is to smash Evilsquid.

- Hello.

- Goodbye.

- Come on come, come, come.

- Congratulations! you played yourself.

- I want cancer, go bring me these players here.

- It's so funny.

- I don't know if it's really effective as special, but it's so ...

- It's so funny to use that worth everything.

- I should have a bomb or something but ... my ink does not go far enough.

- But it allows me to hit someone.

- Him for example.

- No my friend, the only brush here is me!

- Come on, come on, that's it.

- Come on, come on, hello sir.

- Ah, he's here! Oh no he's not, didn't see correctly.

He's there.

- "Isn't like ...cancer to play with an octobrush?"

- Well ... yes, kinda.

Obviously! It's a good weapon huh so ... uh ... right so inside

good hands ... it can do some damage.

- So, Florian you can join if you want.

- the password is on discord.

- Well I can't join, it's weird.

We miss someone then.

- Yeah, well, we're gonna ... - Well, here.

- Zach.

- Hello Zach.

- What is this guy supersonic speed?

- Damn, I'll have to make a kill someday

- Ah finally!

- Payou's sound is too loud.

- Oh? She speaks louder.

- Evil speak louder and Payou speak lower.

- I .. I do not understand.

- It's good, but do not blow in your microphone.

- Do you prefer Fortnite to Splatoon?

- No no .. absolutely not!

- I prefer Splatoon.

- Fortnite... I played twice in my life, and it turned out to be pretty uh ...

- Well? Fucking fuck f*%!?

- kinda laughable...

- I'm trying to make people fall.

- Hi everyone, it's Evilsquid.

- Today we meet again for a new video, a new prank.

- It's not very nice.

(What Evilsquid gonna do?)

(A. run away B. fight C. leave with his baller because he does not care? D. ?????)

- Cya!

- Oh lala Magi.

- Actually you will spectate Magi

- You just don't come in this kind of session dude, you scare people.

- Let the kids play their game alone, go back with the X ranks.

- I am in pain.

- ?????? wtf.

- Actually I threw myself inside missiles and i took them directly in the face...

- We're going to play some games today in the color of ... eumhmmm.

- From the Raph team.

- Of course ... between Raph and Donnie, it's clear.

- I'm team Raph obviously.

- My name is uh .. my name is Raph but .. but OK.

- Here ! We can not ... we can not change our name huh that.

- It's the sound that i like ... that ... well.. (8 minutes and 37 seconds later)

- (...) it's the ... the name is doing everything.

- that's why i picked Raph today I mean.

For more infomation >> EVILSQUID vs. FAKE EVILSQUID - Best of Splatoon 2 - Duration: 5:19.

-------------------------------------------

Live in the D: Pickups for paws in the D - Duration: 3:18.

For more infomation >> Live in the D: Pickups for paws in the D - Duration: 3:18.

-------------------------------------------

Live in the D: Dine in the D - Culantro - Duration: 6:36.

For more infomation >> Live in the D: Dine in the D - Culantro - Duration: 6:36.

-------------------------------------------

Mon dossier d'entreprise – S'inscrire à Mon dossier d'entreprise - Duration: 2:11.

For more infomation >> Mon dossier d'entreprise – S'inscrire à Mon dossier d'entreprise - Duration: 2:11.

-------------------------------------------

Comment gagner de l'argent avec des liens d'affiliation sur kit com - Duration: 4:07.

Hello everyone. It's Lou's screenshot tuto. Today we

let's see how to make money with affiliate links on your

youtube channel or your sites using kit.com. On a youtube channel,

just put the little link kit.com below

your videos like for example here and you can also use bitly for

rename the link and give something a little cleaner,

a little more direct for example here "my kits, Lou's shop ", as a

example. This also works on twitter and facebook anyway

on most social networks so you can also include it on your

websites like for example here on screenshot tutorial, a small shop

with shop screenshots that I could create. To do that, he

must first become a partner with a company that offers affiliate

as for example here Amazon. It works also Ebay. For Amazon,

you have here the main menu and the first thing to do that is going to be

to obtain a tracking IDs. you create a tracking IDs and you have

go register on kit.com with the identifier that you

have created on the affiliate company. You can get paid either

euros either with vouchers and for give you an idea of ​​the rate of

compensation I put you here the link amazon. It can go up to 10%

on some products. You can see an analytic by

example to May 19 I had only one click on a single link that I had created

on a site and from the moment when I set up the kit.com store

there are two days of hindsight, you see that the number of clicks has

greatly increased. To register then on kit.com

you go to this address. I will put the link in the

description of course. You create your kit.com account. This

is completely free. Create a kit is extremely simple. Just click

on "create a kit" what we let's do here. There, for example, I

I will create a kit on the comics Valerian to stay

on this site I'm trying to build and so I'm going to add in

the kit of the products. For that I will on amazon, I choose the article that

I'm interested I take the URL url product and I glue it

in the kit. That's what it gives when finished.

you have a little kit that is completely finished and you can

of course move the items to inside the kit simply to the

mouse. For example, I want the dvd either at the end of the kit. I move them

manually to smile and I can to save.

Once on my site, here it is a google sites,

well I will create a new page I will call shop

story to be original

and by screen capture I will compose the page and insert

hypertext links on the link that corresponding to the kit that I

wants to value and put forward. This is the end of this video. I hope

that it will be useful to you. I do not promise you not to earn miles and cents

with the affiliate links but at the less you have the technique for the

make. Do not forget to subscribe to operate the bell, and to like this

video if you liked it. See you soon.

For more infomation >> Comment gagner de l'argent avec des liens d'affiliation sur kit com - Duration: 4:07.

-------------------------------------------

Mon dossier d'entreprise – Inscription au moyen d'un partenaire de connexion - Duration: 2:11.

For more infomation >> Mon dossier d'entreprise – Inscription au moyen d'un partenaire de connexion - Duration: 2:11.

-------------------------------------------

Mon dossier d'entreprise – Comment utiliser le service Soumettre des documents en ligne - Duration: 2:38.

For more infomation >> Mon dossier d'entreprise – Comment utiliser le service Soumettre des documents en ligne - Duration: 2:38.

-------------------------------------------

Mon dossier d'entreprise – Comment faire des paiements au moyen du débit préautorisé - Duration: 1:39.

For more infomation >> Mon dossier d'entreprise – Comment faire des paiements au moyen du débit préautorisé - Duration: 1:39.

-------------------------------------------

Tuto little chain Bergère de France - Duration: 1:43.

Today I'll teach you how to do the chain stitch

It's the most basic crochet stitch

Leave a free tail of several cm before making a slip knot

To make a slip knot, hold yarn in your left hand

With your right hand, wrap yarn around middle finger and index finger of your left hand,

to make a loop

Place left strand under the loop,

pull through and place loop on hook

Pull yarn slightly to adjust the loop on hook

You've made your very first chain stitch

Then wrap yarn over hook

Take the left strands and wrap them over hook from back to front

Slide hook to pull the yarn-over through loop

The yarn over is now a loop on the hook

This is your second chain stitch

Repeat those steps : yarn over,

pull the yarn-over through loop

Repeat those steps until you have enough chain stitches for your project

To end chain, cut yarn a few cm after chain, and pull end through the loop on hook

Voilà ! Now you know how to crochet a chai 21 00:01:30,000 -->00:01:32,000 Feel free to comment and share this video

Find all the latest news about Bergère de France on social media

For more infomation >> Tuto little chain Bergère de France - Duration: 1:43.

-------------------------------------------

Live in the D: Fresh healthy summer recipes - Duration: 5:10.

For more infomation >> Live in the D: Fresh healthy summer recipes - Duration: 5:10.

-------------------------------------------

Live in the D: Heart of Detroit - Downriver Panthers - Duration: 4:06.

For more infomation >> Live in the D: Heart of Detroit - Downriver Panthers - Duration: 4:06.

-------------------------------------------

Live in the D: Greg Russell talks about Jurassic World: Fallen Kingdom - Duration: 3:53.

For more infomation >> Live in the D: Greg Russell talks about Jurassic World: Fallen Kingdom - Duration: 3:53.

-------------------------------------------

Strasbourg. La victoire d'un couple contre la vaccination obligatoire - FRANCE 365 - Duration: 6:12.

For more infomation >> Strasbourg. La victoire d'un couple contre la vaccination obligatoire - FRANCE 365 - Duration: 6:12.

-------------------------------------------

10 Applications gratuites pour faire du sport chez soi - Duration: 5:24.

For more infomation >> 10 Applications gratuites pour faire du sport chez soi - Duration: 5:24.

-------------------------------------------

Loredana Lecciso: «Con Al Bano d'amore e d'accordo» - Duration: 2:07.

For more infomation >> Loredana Lecciso: «Con Al Bano d'amore e d'accordo» - Duration: 2:07.

-------------------------------------------

BMW X1 2.0D sDrive Business EDE - Duration: 1:07.

For more infomation >> BMW X1 2.0D sDrive Business EDE - Duration: 1:07.

-------------------------------------------

Top 10 Potential Villains for the Next Deadpool Film! - Duration: 14:21.

Very "ice" to see you!

With Deadpool 2 opening with over $300 million at the worldwide box office its first weekend

in theaters, you'd think that a third iteration of the Merc With a Mouth's film franchise

would be a no-brainer.

However, because of the sale of Fox to Disney and the in-works X-Force movie that Deadpool

2 serves as sort of a prequel to, it's not known whether or not we'll get a full-fledged

Deadpool 3 with Deadpool as the solo star (since Deadpool himself Ryan Reynolds has

said that X-Force will serve as the defacto third film).

Either way, if there is any character that could survive or bridge the Disney/Marvel

Studios' Marvel Cinematic Universe and Fox's X-Men Universe you'd think it'd have to be

Deadpool.

Because Ryan Reynolds has long been thought of as Deadpool even before Ryan Reynolds was

added to X-Men Origins: Wolverine, it's nearly impossible to think of another actor playing

the role; it's probably safe to say a third Deadpool movie will happen in some way shape

or form, so we're here to list the top 10 potential villains for that film.

Strap in!

Oh, and by the way... this video definitely has SPOILERS FOR DEADPOOL 2! Watcher beware!

Madcap

Madcap seems like he should be a lot higher on this list because one could argue that

at one point he WAS Deadpool in the comics.

It's sort of hard to explain but Madcap, who is aptly named as he's crazy and wears a hat,

can also regenerate like Deadpool and had served as a foil for Deadpool for

years in the comic books.

At one point, a lightning bolt from Thor actually merged Madcap and Deadpool, which basically

reduced Madcap to a voice in Deadpool's head, explaining how crazy he was (after starting

out as a relatively generic assassin character in the '90's).

One thing that the movies hasn't really touched on much is the voices in Deadpool's head,

and while that may be hard to make work on film, it appears from the trailers that that's

exactly what Sony is doing with its Anti-Hero film, Venom.

If Deadpool 3 ends up going dark, Madcap could end up playing Deadpool's conscience or the

reason for his dark turn that isn't explained until later in the film.

Either way, it could be an interesting way to bring something new to the franchise and

as we've seen from the first two films, nothing is too crazy for the Deadpool universe.

Liking this list so far?

Click that subscribe button and hit that notification bell.

And here's your last warning about spoilers!

Taskmaster

Depending on how you consume your Marvel content, Taskmaster is either one of the few villains

that can pose a threat to Deadpool (in the comics) or Deadpool is one of the only heroes

that can strike fear in the heart of Taskmaster (as in some of the current Marvel television

cartoons).

Taskmaster's got an interesting powerset that we've never seen before, outside of the

end of Captain America: Civil War where Tony's suit learns Cap's fight patterns and quickly

turns the tide of their one-on-one.

Because essentially, Taskmaster can copy the fighting style of anyone he's fighting (while

referencing the fighting style of everyone he's ever fought).

That makes him extremely hard to take down for any character that isn't relatively high-powered,

and while Deadpool can regenerate like (next-to) no other, he still is basically just peak

human in terms of strength.

In the cartoons, Taskmaster fears Deadpool because Deadpool's unpredictability means

he can't actually copy (and thus predict) Deadpool's fighting style; but in the comics

he's actually one of the few villains that is able to best Deadpool in a straight up

fight.

Beyond that Tim Miller, the director of the first Deadpool, mentioned that he wanted to

feature Taskmaster in a future Deadpool film but that he thought the rights had reverted

back to Marvel.

The good news is that Deadpool should be part of the MCU sometime in the next year or two,

but the bad news is that Tim Miller wasn't brought back for the sequel.

So, we'll have to wait and see what role, if any, Taskmaster plays in the future of

Deadpool's exploits on film.

Lady Death

In Marvel Comics, death is personified as a woman named Lady Death and she has a major

role to play in a lot of storylines, with the most famous being the Infinity Gauntlet

storyline that you may or may not have heard of.

In that story and really ever since, Thanos is in love with Lady Death, who brought him

back from the dead after his Thanos-Copter crashed - or something - and most of what

he does in that storyline is done to impress Lady Death (and also stroke his massive ego).

While some thought that the Marvel Cinematic Universe would use Thor: Ragnarok's Hela (the

Queen of Death) in that role, they decided to make Thanos' motivation much more rational

(though they did originally nod to this dynamic in Thanos' first post-credit appearance, showing

him smile when he was told that attacking Earth would be like "courting death").

It turns out that Lady Death, in the books, has a thing for Deadpool (which has been mutual

at times, and more complicated at others) and that's exactly where his power to regenerate

comes; Thanos basically "cursed" Deadpool with immortality so he could never actually

die and end up rekindling his romance with Lady Death.

While Deadpool movies have been wacky, self-aware, and have dabbled with things like time travel,

they are still grounded in realism (at least according to those who make them) and bringing

in a character that symbolizes death could be a bridge too far even for this franchise

(especially as the X-Men Universe has never dealt with even space, let alone other dimensions).

It would be great to see, though, especially if they got creative with it and let his girlfriend

in the films actually become death as she obviously has some experience with dying after

the second film.

We warned there were spoilers.

ID the Selfish Moon

If there's anything that the Deadpool films loves to do more than anything else it's make

in-jokes about both the Fox X-universe and the Marvel Cinematic Universe (as well as

the DC Extended Universe...

And everything else in existence).

One of the largest things that people talked about online after the first Deadpool was

the fact that the third act set piece took place on what really, really appeared to be

one of the crashed Helicarriers from Captain America: The Winter Soldier.

While it's been said that it was just a normal, crashed air-craft carrier, the reference was

intentional and so there's no reason to think that references like that won't continue.

With Guardians of the Galaxy being the most similar in tone to Deadpool in the Marvel

Cinematic Universe, it wouldn't be a huge stretch to think that they might grab their

next villain from the cosmic universe, especially after it's been rumored that the next X-Men

film will involve the team (FINALLY) going to space.

The most recent Guardians of the Galaxy film, Volume 2, featured a villain that was a literal

planet, Ego the Living Planet, and so it might make sense to involve another sentient planet

- Id, the Selfish Planet.

While one has to wonder how Deadpool could kill a Moon, it would be fun watching him

figure it out and that's all we need to know to get in line for this movie!

Sauron

Deadpool 2 introduced time travel to the Deadpool Universe in a way that wasn't nearly as convoluted

as the way Wolverine time traveled in X-Men: Days of Future Past

and considering how much Deadpool tinkered with time at the end of the movie to right

a few wrongs, it might make sense for them to introduce Sauron, the pterodactyl monster

beast from the comics.

Beyond his appearance, which could fill an entire act or two with jokes just by itself,

there's the fact that he shares a name with the big bad from The Lord of the Rings films

(and possibly the Hobbit films?

Who can get through all three of those?).

This could open the film to all sorts of jokes about the Tolkien-verse.

Outside of that, Sauron has the ability to absorb the life essence from the people he's

fighting which means that he could actually kill Deadpool, something that a lot of people

(or planets) on this list can't do, which by itself could bring some much needed drama

and consequence to what could very well be the final Deadpool movie.

Just throw in a cameo from Elijah Wood and we'd be sold.

Hit Monkey

While this character couldn't carry a full film by himself, at least not as the primary

villain, he's just so fun and makes so much sense that you have to list him relatively

high when talking about potential ways to go in the future.

Deadpool has battled Hit Monkey, a sentient monkey that wears a black suit and typically

two-fists glock pistols while assassinating his enemies.

Enough said, next!

Just kidding, what's great about when Deadpool and Hit Monkey meet one another is that the

story, art and just basically everything takes on a surreal edge (or an even more surreal

edge than most Deadpool comics) and that's something that could bring a different visual

aesthetic to the films and breathe new life into the franchise if it feels like it needs

any after, you know, destroying the box-office its first weekend.

What's great is that Spider-Man has also fought Hit Monkey from time-to-time and with Deadpool

joining the MCU, what better story to bring the two together than them trying to track

down and kill a hitman who is also a monkey.

That'd make Infinity Gauntlet look like The Fantastic Four.

Apocalypse

We know what you're thinking...

The X-Men Film Universe already used Apocalypse as a villain and while that's true, a lot

of people felt that X-Men: Apocalypse was a missed opportunity both in terms of how

they used the villain and also in terms of who played the villain.

Oscar Isaac is one of the best young actors in the world and his performance ended up

getting lost under pounds of make up, cliched dialogue and a stereotypical plot.

Considering he's both the first and most powerful mutant out there, it wouldn't be beyond Apocalypse

to come back to face Deadpool, or for Deadpool to run into him should he end up in the world

of the dead on a date with Lady Death or while he's time hopping thanks to the technology

he's acquired from Cable (assuming it has enough juice to do so).

Either way bringing back the quintessential X-Men villain for a redemptive turn feels

a lot like what Deadpool is all about, especially after he spent time to go back to kill his

X:Men Origins self in Deadpool 2 to literally bring redemption to the character and even

that movie.

Puppet Master

One of the problems you get with a hero like Deadpool, or even Wolverine or Super-Man is

that because they can't die, the stakes aren't that high.

So, typically they involve someone that the invincible character loves and that creates

the stakes needed for the audience to become emotionally invested.

However, the 'Damsel in Distress' narrative is not only tired but also sexist.

It'd be far more interesting to bring in a villain like Puppet Master, who has the

ability to control those around him and thus force Deadpool to fight against those he loves

while not overtly killing them.

That's the sort of dynamic that could still be funny but also could become a bit more

serious than some of the other entries on this list (except Hit Monkey, because if you

couldn't tell by his suit, he's all about business).

Sounds like the perfect dynamic that the Marvel Cinematic Universe has been able to hit in

most of its movies, and considering the fact that Puppet Master is technically a Fantastic

Four villain, it might make sense when the MCU becomes one big happy family again in

2019 or 2020.

Mister Sinister

Mister Sinister was actually teased after X-Men: Apocalypse with the thought that he'd

be involved in the plot of Logan, as it was his company that retrieved the Weapon X DNA

from the Alkali Lake facility in that post-credit scene and it has been his Modus Operandi in

the comics to tinker with mutant DNA, like the baddies in Logan did.

However, perhaps because he was too flashy and strange for the grounded, gritty and brutal

film Logan, we instead ended up with a regular businessman as the top bad guy.

That leaves Mr. Sinister's plot-line still open and so it could make sense for him to

not only be the villain for Deadpool 3 but also for him to be involved in Deadpool period

because Deadpool received his powers in the first film from a shady organization that

seemed to be doing experiments on mutants and we never really saw who was in charge

of that entire situation outside of Ajax, who let's face it, didn't seem like he was

the head guy in charge there.

If there's any film that could pull off the awesome aesthetic of Mr. Sinister it's the

Deadpool universe who just had Shatterstar in his full double-bladed sword glory trying

out for the X-Force.

So, please, someone, make this happen, it makes far too much sense not to.

Deadpool

Last but not least the number one villain that Deadpool could face in the third film

could be Deadpool himself!

While this may sound like a mailed in final answer there is actually a lot of precedent

in the comics with Deadpool either teaming up with or fighting different versions of

himself (that's really something comic books do a lot, with the Spider-Verse also being

something that people want to see on film).

There has been a Lady Deadpool, Kid Deadpool and even Headpool, which is the zombie floating

head version of Deadpool.

There's also the Deadpool kills Deadpool comic arc, which is based on the X Kills the Marvel

Universe comics that Deadpool famously also starred in, where he had to go toe-to-toe

with himself.

There's also a few ways that they could seriously do this, especially since time travel has

been introduced.

Should Deadpool run into a villain that is too much for him (but not too much for two,

three or four of him), he could hop into the future or the past for help from himself and

then simply just kill himself after the fight is done so he doesn't have to split any chimichangas

with them.

Who do you think the next Deadpool villain might be?

Let us know in the comments!

And be sure to click that subscribe button and hit that notification bell.

And since you're here, don't go anywhere and check out some of our other videos!

For more infomation >> Top 10 Potential Villains for the Next Deadpool Film! - Duration: 14:21.

-------------------------------------------

Est-ce un viol ? - Duration: 2:13.

For more infomation >> Est-ce un viol ? - Duration: 2:13.

-------------------------------------------

Mercedes-Benz C-Klasse C 200 d Estate Business Solution Avantgarde Automaat - Duration: 0:55.

For more infomation >> Mercedes-Benz C-Klasse C 200 d Estate Business Solution Avantgarde Automaat - Duration: 0:55.

-------------------------------------------

YAI: I/DD - Duration: 1:01.

I/DD stands for

intellectual and developmental disabilities.

A diagnosis of I/DD may affect a person's language, learning, and mobility.

It may also limit a person's everyday social, academic, or occupational functions.

I/DD is a chronic condition

which presents during a persons development before the age of 18

and lasts throughout their lifetime.

Some disabilities mostly affect physical functioning

such as cerebral palsy or epilepsy.

Some disabilities may affect both physical and intellectual functioning,

for example, attention deficit hyperactivity disorder,

autism spectrum disorders,

or Down's Syndrome.

YAI exists to provide people with I/DD

a combination of services, programs, and other long term supports.

We believe in promoting opportunities for people with I/DD

to live, love, work, and learn.

To learn more, please visit YAI.org

For more infomation >> YAI: I/DD - Duration: 1:01.

-------------------------------------------

Come testine sterzo VW GOLF 5 [TUTORIAL AUTODOC] - Duration: 4:07.

Loosen the wheel mounting bolts.

Use an open-end wrench №24. Loosen the lock nut securing the tie rod end to the tie rod.

Use a socket №18. Unscrew the end fastening nut to the steering knuckle.

Use a special puller to take the tie rod end out.

Screw the end out of the tie rod.

Screw on a new tie rod end.

Use a socket №18.Tighten the clamp nut on a new tie rod end.

Use an open-end wrench №24. Tighten the tie rod end locknut.

Install the wheel.

Check and if necessary adjust the wheel alignment on Volkswagen Golf 5.

For more infomation >> Come testine sterzo VW GOLF 5 [TUTORIAL AUTODOC] - Duration: 4:07.

-------------------------------------------

✅ Ανθή Σαλαγκούδη: Πιο αδύνατη από ποτέ... κόβει ανάσες! | News | fthis.gr - Duration: 1:19.

H Ανθή Σαλαγκούδη φωτογραφήθηκε με μαγιό σε δοκιμαστήριο και έκανε γκάλοπ με instastory για το αν της πηγαίνει και αν πρέπει να το πάρει ή όχι

  Μέχρι εδώ όλα καλά, αν η εικόνα της έμοιαζε υπερβολικά αδυνατισμένη. Η όμορφη παρουσιάστρια, η οποία είναι γνωστή για το καλλίγραμμο σώμα της, φαίνεται ότι έχει χάσει παραπάνω κιλά από όσα θα έπρεπε, με αποτέλεσμα να ανησυχίσει λίγο τους διαδικτυακούς της φίλους

Ωστόσο, φορώντας ένα εντυπωσιακό μαύρο ολόσωμο, πόζαρε για μια slefie στον καθρέφτη, ανεβάζοντας τη θερμοκρασία στα ύψη

Το σίγουρο είναι πώς αν η Ανθή εμφανιστεί σε παραλία με αυτό το συγκεκριμένο μαγιό σίγουρα θα

κόψει ανάσας!