An Giang info: Youtube daily report Aug 2 2017

so this just arrived here this is my black version now of the Xiaomi me max 2

so it normally takes Xiaomi about 2 months even a month or so for them to

release the black color for some reason they always just pump out first

the white front on it and then the gold rear and you have to wait a good month

or two to get the black color so it's finally arrived it took three weeks so

very slow to get here because they booked on the Aliexpress sale and it

came on the slow boat so this is not going to be a complete new review just

because it's a new color iPhone fans yeah they do that don't they

you've seen the videos all the iPhones in red let's do a whole new review on it

now I'm not that crazy so I'm just going to compare this one side-by-side with my

white version we have a look at the two colors and then you can really decide on

which you prefer to have the black which will probably show fingerprints more the

white and gold one that doesn't and then of course the screen bezels look a

little bit bigger on the white version compared to the black so let's unbox

this one here and check them out side by side so there's cost me 249 u.s. no

Texas because it came by the slow mail so that is great and it should be a

sealed pack and the global version which it is you can see along the side here

global vision

can I have a look at the charger it should be a European one which it is so

there's I'll type support the charger and it does support quick charging now

if you want to see the full detailed review of this I do have that online

there should be a card popping up about here now and at the end of the video

there will be another card there too so make sure you check that out if you're

going to be buying one of these my full review is covering pretty much

everything there that I could think on so a little bit of gaming the battery

life call quality Wireless speeds and some benchmarks so I must say this looks

so much better in black I really do like that so here's a view at the bottom of

them it's more prominent the loudspeakers the Torx screws and the

antenna lines you notice they're more on the white and gold version so I can see

that deep black version is a lot more prone and more susceptible to smudges

and fingerprints from your hand oils you've got sweaty hands and well it is

summer here and I'm sweltering in about 35 degree temperatures right here it

with the studio lights beating down on me and look at that but Missy you're

going to have to clean out all the time and looking now at the gold version it's

just not as noticeable as it you don't really have that issue so my gold

version does one ship with the chinese rom which I later flash to the global

ROM but when you start out with the global ROM these are the options you get

so you have a lot of languages on here to start out with whereas on the other

one of course it's just English in Chinese so you've got pretty much every

single language you can think of that Android 7 support is there for you so

looking at the front of them now the white face of course has the ugly black

bezel now it is of course present on the black version but you do not see it

because it blends in with the black front face there so it looks to me

aesthetically better it does sort of make the bezels look a bit bigger though

doesn't it on the black version on the left and right vessels at least now I

have noticed one thing that to meet personally because of the white

front on it it seems to make the screen pop out and stand out a little more

whenever I use a tablet with a white face and then go back to the black face

the screen just seems to have that effect to me that sometimes it just the

image just seems to pop out maybe because of the contrast between those

white bezels and then the screen content is what does that they have a difference

to you'll notice that down the bottom with the menu keys

they are always visible on the white version and then on the black version

you only see them when of course you end up capping the screen here then they

light up with those backlit clean keys they have so there we go which version

would you pick the black one or the white one let us know down in the

comments for me personally I'm going to go with the black version now this is

the reason I bought it because I do like black phones I meaning tied because I

see so many white face front tablets and mobile phones because shower me always

released the white version first and that always tends to be the vision that

I will get first when I review them so that's why I'm going to it and the other

reason is because I like the fact that I don't see those black bezels on the

black version but of course it will show fingerprints but that doesn't really

bother me too much because I'm looking most of the time at the front of my

mobile phone and not the rear of it so fingerprints really not gonna be a

problem for me thank you so much for watching this little quick comparison

video between the black and white version if you want to see the full

review of the me max 2 because in this video I haven't gone into any real

detail of that please do check that out because they cover every single thing

about this mobile including battery life benchmarks camera samples you name it

it's all in that review thank you so much for watching bye for now

For more infomation >> Xiaomi Mi Max 2 Black Global Version Unboxing & White Comparison - Duration: 5:42.

-------------------------------------------

San José Foro Municipal 2017 - Duration: 7:12.

For more infomation >> San José Foro Municipal 2017 - Duration: 7:12.

-------------------------------------------

The Attributes of Jehovah

For more infomation >> The Attributes of Jehovah

-------------------------------------------

Mercedes-Benz S-Klasse 320 CDI Prestige, AIRCO(CLIMA), CRUISE CONTROL, ELEK-SCHUIF-/KANTELDAK, LEDER - Duration: 0:54.

For more infomation >> Mercedes-Benz S-Klasse 320 CDI Prestige, AIRCO(CLIMA), CRUISE CONTROL, ELEK-SCHUIF-/KANTELDAK, LEDER - Duration: 0:54.

-------------------------------------------

Skull Crawler Attack & Conrad Gas Mask Scene | Kong: Skull Island (2017) Movie CLIP Blu-ray 4K - Duration: 5:14.

Run!

In here!

Quiet.

I told you this damn place was a no-no.

Damn it.

All right, let's move. Rally on me.

Rally up! Rally up!

Somebody cover the civilians' six. Let's move!

Oh, shit.

Randa!

Set up the 50!

Go!

Bring the torch! Do your thing!

Slivko! Gas!

Marlow! Sword!

Slivko, hang on!

This thing's moving!

For more infomation >> Skull Crawler Attack & Conrad Gas Mask Scene | Kong: Skull Island (2017) Movie CLIP Blu-ray 4K - Duration: 5:14.

-------------------------------------------

Battlefield 1 Community Test Environment Is Here for Consoles! How to Access the CTE on Xbox and PS4 - Duration: 3:25.

The Community Test Environment for Battlefield 1 is finally here for players on Xbox One

and Ps4 after months of waiting.

This means console players will finally have the ability to not only play content before

its released, but also to provide better feedback to the developers to help make Battlefield

1 better.

Players are encouraged to leave their feedback over on the CTE reddit, which I'll link

in the video description.

To access the CTE on consoles, players must have a Battlefield 1 Premium Pass.

To download the CTE, you'll need to tab over to the "more" tab within Battlefield

1 itself, and then select the Community Test Environment icon.

You'll be prompted to agree to the terms of the CTE, and can then download the application.

To start the Battlefield 1 CTE, you'll find it as a separate game within your collection.

Once open, you should be able to join a server and start your CTE career.

Don't expect your experience and unlocks to carry over, however.

Everyone starts at level 0.

DICE is giving players another reason to spend time on the CTE – three more dogtags will

be available in the future for CTE players.

The Recruit dogtag unlocks for just playing on the CTE, the Regular dogtag for playing

10 hours on the CTE, and the Professional dogtag for putting in 20 hours and logging

at least 1500 kills on the CTE.

No word on when these dogtags will be awarded.

The first map on the console Community Test Environment is the new Lupkow Pass map from

the Russian-themed DLC In the Name of the Tsar.

The map is due out for release sometime this month, but if you want to try it out early

and leave some feedback, now is your chance.

Celebrations aside, there's a good deal of debate on why it took so long for the CTE

to make it to consoles in the first place.

DICE was reportedly ready to bring the tool to consoles months ago – before things hit

a snag.

All things point to problems with third parties like Microsoft and Sony.

The latter is rather infamous for its reluctance to support mods for Fallout 4, which delayed

the arrival of mods for the game by six months, and still hampered their implementation.

DICE hasn't made a public comment regarding why it took so long to bring CTE to console.

But, are you excited to play on the Battlefield 1 CTE?

What are you looking forward to most?

Tell me

in the comments.

For more infomation >> Battlefield 1 Community Test Environment Is Here for Consoles! How to Access the CTE on Xbox and PS4 - Duration: 3:25.

-------------------------------------------

The Science Behind Neurodiversity, with Dr. Malav Trivedi | EDB 92 - Duration: 27:13.

For more infomation >> The Science Behind Neurodiversity, with Dr. Malav Trivedi | EDB 92 - Duration: 27:13.

-------------------------------------------

Toyota Corolla Verso 2.0 D4-D Linea Luna - Duration: 0:57.

For more infomation >> Toyota Corolla Verso 2.0 D4-D Linea Luna - Duration: 0:57.

-------------------------------------------

Here's My Canada: Unite with Countries in Need - Duration: 0:30.

There are heroes in this country that don't give up.

Some people give up but the hero that reminds them

won't make them give up.

Some people think it's the same as other countries,

but this country where the government helps,

people help each other off the ground and

where the most honourable heroes are.

Other countries sometimes need help.

Canada unites with those countries in need.

Lots of people have come true to this wonderful

country. From First Nations to aboriginal.

For more infomation >> Here's My Canada: Unite with Countries in Need - Duration: 0:30.

-------------------------------------------

The Science Behind Neurodiversity, with Dr. Malav Trivedi | EDB 92 - Duration: 27:13.

For more infomation >> The Science Behind Neurodiversity, with Dr. Malav Trivedi | EDB 92 - Duration: 27:13.

-------------------------------------------

Serene House NoSpill Wall Plug Wax Warmer - Duration: 9:29.

For more infomation >> Serene House NoSpill Wall Plug Wax Warmer - Duration: 9:29.

-------------------------------------------

최신 새:'땀 흘리는 모습이 섹시?'…남성 40%, 여성 땀에 성적 매력 느껴 |아이돌 24/7 - Duration: 6:08.

For more infomation >> 최신 새:'땀 흘리는 모습이 섹시?'…남성 40%, 여성 땀에 성적 매력 느껴 |아이돌 24/7 - Duration: 6:08.

-------------------------------------------

#PotatoToBasic - PAYDAY 2 LowEndConfig [FPS Boost - NO MODS Lod BIAS] - Duration: 6:46.

PAYDAY 2 is undoubtedly the king of 4-player cooperatives games.

A simple game mechanics and a variety of maps allows you to be free

to play your way, in addition to an extensive support of mods.

Recently, PAYDAY 2 was put free on Steam for a limited time which brought millions

of new users and also many potatos to optimize.

This time, I will bring you how to carry PAYDAY 2 to the minimum, to play the maximum,

So forget details and ridiculous things like Dynamic Lights or Shadows.

I'm Tak_Riuto, and this is...

Once inside the game, we will go to Settings, and look for "Gameplay", Will unmark

The first 2 boxes, those 2 boxes consume a lot of CPU.

Then we go to "Video" where we will have to bring the quality of the Effects to 0%,

The rest we will see in "Advanced Settings" where we can choose how high we want

the quality of the texture, I recommend putting everything in low, FPS limit to the maximum

That your monitor allows (In my case, 60) and Buffer reading either in 1024 or 2048

Neither more nor less.

Now I will show you what the game looks like in the different graphic configurations

For an advanced configuration you will have to download my Renderer Plus, cut it,

they will paste it into the data folder of PAYDAY 2, to get to it press "Windows + R",

And write "Appdata", enter "Local" and look for "PAYDAY 2" and paste the Renderer, they give you to replace

And then simply edit it.

You can use the editor of your choice, I will use VS Code because I like it.

This file is divided into 2 parts, the first one is D3D_Device here you will find data

Of your graphics card that are not relevant, let's focus on the lines that matter to us

Which are the Resolution, here you can choose a customized resolution of your preference

But the minimum that supports the game is 512x384, So do not put values lower than that.

The line below defines whether to play in window or not, changes from True to False.

The refresh_rate is the frequency of your monitor, and the aspect_ratio is nothing more than the split

The width of the monitor between the high, in my case 640/400

The bottom is where magic happens, we are going to modify all these variables to

That the game goes lower than it can, all that has a number, vary between

0, 1, 2 or 4.

All that say Low, or Very Low can change by the 5 on the screen, those that

Say False can change between True or False.

And all those that are in Disabled, can put in Enabled.

Leave the configuration like this if you want the best performance with a graphic

More or less decent.

We keep, we close and we go to properties, we mark "Only reading", we apply, we close

all and we are going to show you how the Renderer Plus looks.

The above configuration is responsible for deactivating effects and dynamic lights without affecting dramatically

the graphic, but if they want to go further, then open the file again and seek

In the editable lines all values that say "Low" or "Very Low" and change them

To "Very_Low", this will change the textures to Lod BIAS, or Textures 0, sending the graphics to the fuck.

Be sure to edit everything, save the file, if you are using VS Code to over-write,

They close, they go to properties and they mark "Only Reading" and they execute the game, this is how

look PAYDAY 2 in Lod BIAS

Finally a configuration that can raise the FPS without sacrificing the entire graph.

We go to "Program Files", "Steam", "Steamapps", "Common", "PAYDAY 2" and edit

The context.xml file, once open we will look for the following variables, the first one is multithreaded,

Which will be set to "True", you can change it to "False" and try, this can improve the

FPS on certain CPUs, so try.

The second variable is nls_lookup size, this value varies between 8 and 128, try again

Since it varies according to your GPU, we save and again to Properties, Read Only and we close everything.

This is all the optimization tutorial of PAYDAY 2 without MODS, and later on

I'll do a tutorial with Mods, here Tak_Riuto, see you next time, chau!

For more infomation >> #PotatoToBasic - PAYDAY 2 LowEndConfig [FPS Boost - NO MODS Lod BIAS] - Duration: 6:46.

-------------------------------------------

Toyota Landcruiser 200 Series Dual Battery Setup - Accelerate Auto Electrics Sunshine Coast - Duration: 3:51.

Hi guys, Briohny here from Accelerate Auto Electrics

and Air Conditioning on the Sunshine Coast.

Today I'm going to run you through a dual battery set up

and accessory install we've done on

this Toyota Land Cruiser 200 series.

So, first up is under the bonnet.

We've removed the two existing smaller starting batteries

that comes standard with the 200 series,

so they're usually here and here,

and instead we've put a bigger starting battery.

We've used the RACQ lead acid cranking battery.

The reason that we love the RACQ batteries is that

they come with a two year roadside assistance warranty.

Then over here, we've put in an auxiliary battery,

or the dual battery system.

So, that's where the second starting battery used to be.

Because the auxiliary battery's under the bonnet

we cannot used AGM battery due to heat reason,

so we've used the Supercharged MRV70 All-Rounder

which is the 105 amp power.

Between the two batteries we've put in

a REDARC SBI12 smart battery isolator.

That'll keep the auxiliary battery fully charged

and ensure that the new starting battery is isolated

and won't be drained when the 12 volt accessories

and fridges are running off the auxiliary battery.

The customer went with a smart battery isolator so

that way we could install a jump start, or push button.

It's just basically here on the dash.

What that means that if the starting battery runs flat,

and it doesn't have enough power to start the car,

we can jump start it off the auxiliary battery using

this push button here on the dash.

The customer tows a caravan, so we've installed

the REDARC TowPro Elite electronic brake controller.

Here is the dash-mounted knob which is nice and tidy

and small compared to other brake controllers on the market.

The customer's caravan already has a camera installed

on the rear of it which is great for seeing behind

the caravan when you're reversing into a tight spot.

They just need a screen in the car to view

the camera output, so we've put

this rear vision mirror which has got

a 4.3 inch LCD screen in it.

So, that goes over the top of their existing mirror.

So, when it's plugged in to the caravan,

the output from the camera on

the caravan is displayed instead of the mirror.

We've also installed a UHF radio down under here

for communication with other vehicles

when they're on the road.

So, in the rear of the car here we've put in some sockets

to keep all the devices charged.

At the top we've got a dual USB socket, so

it's got two USB plugs there.

We've then got a cigarette socket down here,

and also an Engel fridge socket.

We can set up a combination, whatever sockets

you would like in the back, and so this is allowing

you to keep all your devices charged up.

It runs off the auxiliary battery which

has been installed under bonnet, and then we've got

a little reading here that tells us the voltage

of that auxiliary battery so you know when it's running low.

Then on the back of the car we have

a seven pin large trailer plug with a power feed,

which will run the fridge in the caravan while

they are driving to ensure everything stays nice and cold.

The power feed has a heavy duty six millimetre cable

linking it from the auxiliary battery.

There's also an Anderson plug, and this'll charge

the batteries in the caravan while driving.

So, when they arrive at the campsite,

they're fully charged up to run all

the 12 volt accessories and lights in the caravan.

They've also got their camera cable here

which just hooks up to the back of the caravan so

they can see behind it.

There are many ways we can set up 4WDs

and caravans for dual batteries and towing solutions.

We customise each job to the customers and their needs.

If you'd like a quote on getting your 4WD set up

for towing or with a dual battery system,

give us a call on 1300 227 353, comment below,

or email us at info@amae.net.au.

For more infomation >> Toyota Landcruiser 200 Series Dual Battery Setup - Accelerate Auto Electrics Sunshine Coast - Duration: 3:51.

-------------------------------------------

Weekly Travel Vlogs

For more infomation >> Weekly Travel Vlogs