Breaking News, Tomorrow, all the educational institutions of the left-wing student organizations will protest
-------------------------------------------
China Military : Chinese fighter jets conduct unsafe maneuver near US aircraft - Duration: 4:25. For more infomation >> China Military : Chinese fighter jets conduct unsafe maneuver near US aircraft - Duration: 4:25.-------------------------------------------
Volvo V60 2.4 D6 285pk AWD Plug-in Hybrid Summum/ 0% bijt./ Ex Btw/ Sportstoelen/ Leer/ Schuifdak/ S - Duration: 1:00. For more infomation >> Volvo V60 2.4 D6 285pk AWD Plug-in Hybrid Summum/ 0% bijt./ Ex Btw/ Sportstoelen/ Leer/ Schuifdak/ S - Duration: 1:00.-------------------------------------------
Building a Blackberry Trellis – Family Plot - Duration: 9:08.- Mr. D., it is a windy day out here today, don't you think?
- It is a blustery day, as Winnie the Pooh would say.
Definitely blustery out.
- It feels good though.
- Yeah, it does.
Feels real good.
- Now, we have our blackberries here.
And I understand you're gonna make a trellis
for the blackberries to climb, right?
- That's right.
They're starting to run a little bit on us,
and we're gonna give 'em somewhere to go.
We're gonna give 'em somewhere to go.
- So where do we start with that?
- Yep, let's do that.
What we're gonna do is we're gonna use a,
this is what I've got in my yard, I've got,
we've got T-posts, and a livestock panel.
So they're not, they're alive.
They're livestock I guess, right?
So we're gonna put a post on each end.
Raise it as high as we can.
Two posts in the middle so, because there's gonna be
quite a bit of weight on it
when these blackberries get full grown.
And we don't want it to blow over.
So we'll have four posts and 16 foot livestock panel.
We'll be in good shape.
All right, ready to get to it?
- Let's get to it.
- Okay, I'm gonna start.
The first post
will kinda determine our starting point,
and then we will measure, we'll do a little measuring
from that point on.
As tall as this post is, I've learned that instead of
setting the post up like this and trying to get
the post driver on it, it's better to do it,
put the post driver on it first.
- Smart.
Yeah, that'd be hard to reach way up there.
- Hope I can reach it.
Now we got it up here.
So I want it
about four inches off of where the plants sit.
I'd rather get it a little bit too far off than not enough.
I wanna make sure the posts are all turned the same way.
And I think that's gonna do it.
I'm only gonna put it in the ground to,
to that anchor point right there.
We need a tall guy here.
- Yeah, I know.
Need me to hold it?
- You got it?
- Yeah, I got it.
- Okay, we got it in enough, I wanna make sure
I'm kinda going straight (chuckles).
- Whoa, look at that!
- How 'bout that?
- Look at that.
Oh, leaning over a little bit.
- All right.
- All right.
Good stuff.
- Take it again.
- Take it again.
- Need to do a little bit with that.
Still needs to go that way a little bit.
- Yeah, this way.
- We have another tool that's gonna help us on the leveling
when we mount the livestock panel on it,
we can adjust it just a little bit if it needs it,
but let's see how close we are.
About the same, it still wants to go that direction.
So we'll need to pull it over a little bit when we,
when we hook the livestock panel to it.
We need to go 16 feet.
16 feet over here.
That's about where I want it.
- Got it.
- Yeah.
Let's see here.
Perfect there.
- Let me watch this one.
- Ah.
Okay.
- (Chris) I think that did it.
- Okay, let's do string.
Okay, the string is a fencing technique
to make sure all the posts are in line.
If you're building a fence, you'll go to your corners,
you know, and put your posts up, and put your string,
and then measure off the distance between the posts.
It basically, I'm putting up a fence right here,
is what I'm doing.
- (Chris) I've seen guys for
the fencing company do the same thing.
- Okay.
- Trusted knot.
- Now, we can, we need to put the other two in here,
so let's see what it looks like with my tape measure.
Got four posts, but we're gonna have three spaces, right?
Let's go five two.
I'm gonna go 11 two.
(laughing)
- How about that?
Little change in your pocket, huh?
- (Mike) I learned that trick
from a golfer I saw on TV one time.
- Wanna start at this one?
Five two, right?
- Five two.
Five foot two.
- (Chris) Get it?
- (Mr. D.) Now I'm gonna take
my quarter back.
- (Chris) Yeah (chuckles).
Oh, I think that's it.
- Okay.
Good.
- You get it?
- About right.
Don't run off with my quarter now, buddy.
- I'll try not to go too far with it.
- All right.
Hard work's done.
Okay.
- Okay.
- Come all the way up.
Now hang it right there.
But these are standard T-post fasteners.
It's a pretty strong gauge of wire,
and it's, again, designed to hold livestock,
so it ought to be able to hold this blackberry.
So I'm gonna hang one here.
And then we'll go down to the other end
and hang the other and arrange the blackberries,
and then we'll, we'll try to get the rest.
- (Chris) Gotcha.
- Perfect fit.
- (Chris) How about that.
(chuckles)
How about that.
- You can make it fit.
These are the two hardest ones, by the way.
- (Chris) The first two, right?
- Uh-huh.
Think I was using the wrong pliers?
- (Chris) Oh man.
- These are called fencing pliers.
- (Chris) Oh, are they?
- For a reason, I guess.
Okay, these.
These wires, these fasteners, are pre-bent
to fit on the T-post and you can use 'em
for any kind of fencing.
You can use it for American wire.
And with these pliers you just grab it
like that right there.
Grab the loop, and then I'm gonna twist the pliers
and it's gonna put a bend in that wire.
And then I'll come to the other side,
and using the side of my pliers,
I'm gonna grab that and just bend it down.
Crimp it down.
And that's secure.
That's very secure.
- (Chris) All right, is that the last one?
- Last one, I think this ought to do the trick.
Little feller on there.
One I've been looking for, anyway.
- (Chris) Oh yeah.
Oh, that looks good.
- But this, I mean, you can work under this.
Let's go ahead and, I'm gonna go ahead
and give these a little help right here.
They're probably, they've been waiting for that.
- Oh yeah.
Nice fruit on there, too.
- And in just a few years, this will be one solid mass
of blackberries and you'll wonder why you planted 'em.
(laughing)
- Well Mr. D., we can't thank you enough
for this demonstration, man.
- You're most welcome.
- This is good.
- Best of luck to you.
-------------------------------------------
Russia working on advanced air defense system - new air defence system for russian paratroopers - Duration: 1:45. For more infomation >> Russia working on advanced air defense system - new air defence system for russian paratroopers - Duration: 1:45.-------------------------------------------
Dodge Ram 1500 SPORT WHITE/BLACK EDITION 2015 - Duration: 0:57. For more infomation >> Dodge Ram 1500 SPORT WHITE/BLACK EDITION 2015 - Duration: 0:57.-------------------------------------------
3 Awesome Life Hacks or Ideas - Duration: 15:35. For more infomation >> 3 Awesome Life Hacks or Ideas - Duration: 15:35.-------------------------------------------
MGS5 - P.T On the radio - Duration: 3:21.Hi everyone!
Today I bring you a video from a long time ago
Well, what I would like to teach
Is what happened to me in this area of the map of MGS5
And I must admit that it scared me quite a bit.
The first strange thing was that there was nobody
Those who have played will know that there are always people here
That's why I put on the night vision goggles
Seeing that there was no one, I took them off
I zoomed in case anyone was in the background
but no
Again, I pulled the gun in case there was any guard
And now comes what I had never seen
It is the radio of the demo of P.T (Silent Hill)
By this time I was starting to get a bit scared
The 00:00
In P.T if you want to advance, you have to wait at 00:00
I decide to go out and explore
There was nothing inside the cave
At the moment I was already with the tension in the body
But the tension went up a new step
¿¿??
At this moment I decide to remove the game, I got scared much
-------------------------------------------
Jayson Chronos - Midnyt DreemZ - Duration: 3:53.Hello Guys, This is Vaishnav a.k.a. Jayson Chronos!
and this is my First Song , Midnyt DreemZ
I started working on electronic Music since last year and I play around with sounds and create new melodies....
Finally i uploaded this song...which was actually supposed to come out a week ago!
But its hard to find time
Anyways ! i hope u guys enjoy it and...
Please dont forget to Like and subscribe!
and stay tuned for more!
-------------------------------------------
How Far Away is Fusion? Unlocking the Power of the Sun - Duration: 9:01.I'd like to think we're smarter than the Sun.
Let's compare and contrast.
Humans, on the one hand, have made enormous advances in science and technology, built
cities, cars, computers, and phones.
We have split the atom for war and for energy.
What has the Sun done?
It's a massive ball of plasma, made up of mostly hydrogen and helium.
It just, kind of, sits there.
Every now and then it burps up hydrogen gas into a coronal mass ejection.
It's not a stretch to say that the Sun, and all inanimate material in the Universe,
isn't the sharpest knife in the drawer.
And yet, the Sun has mastered a form of energy that we just can't seem to wrap our minds
around: fusion.
It's really infuriating, seeing the Sun, just sitting there, effortlessly doing something
our finest minds have struggled with for half a century.
Why can't we make fusion work?
How long until we can finally catch up technologically with a sphere of ionized gas?
The trick to the Sun's ability to generate power through nuclear fusion, of course, comes
from its enormous mass.
The Sun contains 1.989 x 10^30 kilograms of mostly hydrogen and helium, and this mass
pushes inward, creating a core heated to 15 million degrees C, with 150 times the density
of water.
It's at this core that the Sun does its work, mashing atoms of hydrogen into helium.
This process of fusion is an exothermic reaction, which means that every time a new atom of
helium is created, photons in the form of gamma radiation are also released.
The only thing the Sun uses this energy for is light pressure, to counteract the gravity
pulling everything inward.
Its photons slowly make their way up through the Sun and then they're released into space.
So wasteful.
How can we replicate this on Earth?
Now gathering together a Sun's mass of hydrogen here on Earth is one option, but it's really
impractical.
Where would we put all that hydrogen.
The better solution will be to use our technology to simulate the conditions at the core of
the Sun.
If we can make a fusion reactor where the temperatures and pressures are high enough
for atoms of hydrogen to merge into helium, we can harness those sweet sweet photons of
gamma radiation.
The main technology developed to do this is called a tokamak reactor; it's a based on
a Russian acronym for: "toroidal chamber with magnetic coils", and the first prototypes
were created in the 1960s.
There are many different reactors in development, but the method is essentially the same.
A vacuum chamber is filled with hydrogen fuel.
Then an enormous amount of electricity is run through the chamber, heating up the hydrogen
into a plasma state.
They might also use lasers and other methods to get the plasma up to 150 to 300 million
degrees Celsius (10 to 20 times hotter than the Sun's core).
Superconducting magnets surround the fusion chamber, containing the plasma and keeping
it away from the chamber walls, which would melt otherwise.
Once the temperatures and pressures are high enough, atoms of hydrogen are crushed together
into helium just like in the Sun.
This releases photons which heat up the plasma, keeping the reaction going without any addition
energy input.
Excess heat reaches the chamber walls, and can be extracted to do work.
The challenge has always been that heating up the chamber and constraining the plasma
uses up more energy than gets produced in the reactor.
We can make fusion work, we just haven't been able to extract surplus energy from the
system… yet.
Compared to other forms of energy production, fusion should be clean and safe.
The fuel source is water, and the byproduct is helium (which the world is actually starting
to run out of).
If there's a problem with the reactor, it would cool down and the fusion reaction would
stop.
The high energy photons released in the fusion reaction will be a problem, however.
They'll stream into the surrounding fusion reactor and make the whole thing radioactive.
The fusion chamber will be deadly for about 50 years, but its rapid half-life will make
it as radioactive as coal ash after 500 years.
Do you know coal ash is radioactive?
If all goes well, fusion reactors should produce an enormous amount of power.
And yet, we don't seem to have any operational reactors.
In a moment, I'm going to talk about the specific fusion experiments going on across
the world, how they're doing, and when we could expect to see them produce more power
than they require, but first, I'd like to thank James Aberson, Luke Hutyler, Eric M,
Arrakiv, and the rest of our 731 patrons for their generous support.
If you love what we're doing and want to help out, head over to patreon.com/universetoday
Now you know what fusion power is and how it works, what's the current state, and
how long until fusion plants give us unlimited cheap safe power, if ever?
Fusion experiments are measured by the amount of energy they produce compared to the amount
of energy you put into them.
For example, if a fusion plant required 100MW of electrical energy to produce 10 MW of output,
it would have an energy ratio of 0.1.
You want at least a ratio of 1.
That means energy in equals energy out, and so far, no experiment has ever reached that
ratio.
But we're close.
The Chinese are building the Experimental Advanced Superconducting Tokamak, or EAST.
In 2016, engineers reported that they had run the facility for 102 seconds, achieving
temperatures of 50 million C.
If true, this is an enormous advancement, and puts China ahead in the race to create
stable fusion.
That said, this hasn't been independently verified, and they only published a single
scientific paper on the milestone.
Researchers at the Karlsruhe Institute of Technology (KIT) in Germany recently announced
that their Wendelstein 7-X (W7X) stellarator (I love that name), heated hydrogen gas to
80 million C for only a quarter of a second.
Hot but short.
A stellarator works differently than a tokamak.
It uses twisted rings and external magnets to confine the plasma, so it's good to know
we have more options.
The biggest, most elaborate fusion experiment going on in the world right now is in Europe,
at the French research center of Cadarache.
It's called ITER, which stands for the International Thermonuclear Experimental Reactor, and it
hopes to cross that magic ratio.
ITER is enormous, measuring 30 meters across and high.
And its fusion chamber is so large that it should be able to create a self-sustaining
fusion reaction.
The energy released by the fusing hydrogen keeps the fuel hot enough to keep reacting.
There will still be energy required to run the electric magnets that contain the plasma,
but not to keep the plasma hot.
And if all goes well, ITER will have a ratio of 10.
In other words, for every 10 MW of energy pumped in, it'll generate 100 MW of usable
power.
ITER is still under construction, and as of June 2015, the total construction costs had
reached $14 billion.
The facility is expected to be complete by 2021, and the first fusion tests will begin
in 2025.
So, if ITER works as planned, we are now about 8 years away from positive energy output from
fusion.
Of course, ITER will just be an experiment, not an actual powerplant, so if it even works,
an actual fusion-based energy grid will be decades after that.
At this point, I'd say we're about a decade away from someone demonstrating that a self-sustaining
fusion reaction that generates more power than it consumes is feasible.
And then probably another 2 decades away from them supplying electricity to the power grid.
By that point, our smug Sun will need to find a new job.
What do you think?
Are we about to unlock the unlimited power of the Sun?
And if you did have access to that kind of energy, what would you do with it?
I'd love to know your ideas in the comments.
In our next episode, we investigate cosmic inflation.
That mind bending time right after the Big Bang when the Universe expanded to an enormous
size in moments.
Like these ideas?
I've created a custom playlist for this episode.
We start with one of our own episode about why iron isn't poison to stars.
Then onto more information about fusion from Isaac Arthur and others.
It starts right now.
Heated hydrogen gas to eighty million cel- aww.
-------------------------------------------
Bendy and Boris: The quest for the ink machine - Behind the scenes and off set (Español) -PARTE 1- - Duration: 1:26. For more infomation >> Bendy and Boris: The quest for the ink machine - Behind the scenes and off set (Español) -PARTE 1- - Duration: 1:26.-------------------------------------------
HOW TO DOWNLOAD A MINECRAFT SKIN - Duration: 1:36.Hello... :D
-------------------------------------------
Plainfield Sewer Cleaning | 815-630-1024 | Plainfield IL Sewer Cleaning - Duration: 1:08.Plainfield Sewer Cleaning. Are you sick of having your drains or sewer line clogged and having to pay a plumber every
6 months to
come clear it out?
Hydro jetting is a long lasting solution to the problem of drain obstructions and tree
roots intruding into
sewer lines.
We have a state of the art high pressure water jetter that cleans out grease, sludge, tree
roots or any other
blockages in your pipes.
While conventional snaking only pokes a hole in the clog, water jetting cleans out the
entire surface of the
pipe.
We are trained experts in sewers, drains, and septic systems.
We'll stop your problem at it's source and keep your home safe.
To get a better view of what's going on, our technicians can do an in-pipe camera inspection.
If your drain is blocked and causing issues, emergency service is available.
Give us a call today, we'll get there fast!
-------------------------------------------
Method of fixing the contacts in the "peace of mind contact" in the notification bar - Duration: 2:04.Method of fixing the contacts that you have registered in the "peace of mind contact" in the notification bar
Hello everyone
This time, we will introduce the method of fixing the contacts that you have registered with the safety confirmation application "peace of mind contact" for the Android in the notification bar
By fixing the user of the contacts that you have registered in the notification bar in the "peace of mind Contact" app,
Feature that allows you to share your location information immediately to the user from the notification bar offers is implemented
For example, and further, that you registered in the notification bar to register their parents to the "peace of mind Contacts" app,
It is why it is possible to inform immediately to the parents's current location information at the time of emergency
Method of fixing the contacts that you have registered in the "peace of mind Contact" app in the notification bar, start the "peace of mind Contacts" app,
Touch the menu icon that appears to the right of the contacts that you have registered, you simply touch the "fixed contacts"
Contact specified in this is fixed in the notification bar, you will also be able to share your location information immediately without having to launch the app
Cancellation of fixed also can be performed from the notification bar to direct, or you can do the release in the same procedure as contacts fixed
Scene to take advantage of the "peace of mind contact" can be a emergency is assumed
Every time you might not have time to start looking for an application at that time
Therefore keep in fixed as much as possible family and close relationship of contacts notification bar, it is wise that you be able to immediately inform the current location
Above, it was the introduction of the method of fixing the contacts that you have registered with the safety confirmation app for Android "peace of mind contact" in the notification bar
No comments:
Post a Comment