Youtube daily report Jun 21 2017

Colors for Children to Learn Colors with Vehicles - Colours for Kids - Learning Videos for Toddlers

For more infomation >> Colors for Children to Learn Colors with Vehicles - Colours for Kids - Learning Videos for Toddlers - Duration: 4:00.

-------------------------------------------

(ENG Subtitles) Gold - Duration: 4:15.

in this video I'll show the before and after of this photo

which was shot with back lighting

so there was a flat light on the face

I tried to enhance the contrast in P.P.

I could've used, of course, some panels or strobe

but usually to be faster I shoot without them

the good thing about back lighting is the overall mood you can obtain in the photo

the negative side is the flat light and lack of contrast

to improve contrast in the right way I must do an heavy post production work

I created a new Lightroom preset that of course you can download from Skillshare

just follow the links in the video description

this is the original photo (RAW)

now I turn on the preset

after that I turned on lens distortion and CA fix

that's the difference between the unedited version and the Lightroom one

I show you step by step

firstly I cloned out this hair which was very annoying, then few skin imperfections

then I fixed a few hair that were covering the mouth and the teeth

there is no noise reduction

sharpness with the usual method

dodge and burn

here I tried to enhance the lighting, especially on the model

after that I fixed chromatic aberrations

especially on the skin, because by dodging a lot the tones will change

then the color action, which in this case is the new one (GOLD) at 80 percent opacity

and the Dryad action from a few weeks ago at 25 percent opacity

you can check how I created them both on Skillshare

these are the last corrections I did

I enhanced the golden tones

for a stronger summer vibe

also I tried to restore the blue of Benedetta's eyes, that with the wheat reflection

the dodge and everything else they looked more green-ish than they really are

let me know your thoughts in the comments and if you have any question just ask :)

For more infomation >> (ENG Subtitles) Gold - Duration: 4:15.

-------------------------------------------

Construction worker critically injured after being struck by car on H-1 Freeway - Duration: 0:35.

KRIS:

THE PUNCHBOWL ON-RAMP TO THE H-1

AND PALI HIGHWAY IS NOW OPEN...

IT WAS CLOSED FOR MOST OF THIS

MORNING AFTER A 47-YEAR OLD

ELECTRICAL WORKER WAS STRUCK BY

A

CAR.

IT HAPPENED AT 12- 40 THIS

MORNING...

LOST CONTROL AND CRASHED INTO

THE

WORKER...PINNING HIM BETWEEN A

CONSTRUCTION TRUCK.

THE VICTIM..IDENTIFIED AS AN EWA

BEACH MAN.. IS IN CRITICAL

CONDITION AT THIS HOUR...THE 22

YEAR

THE INFLUENCE. THE INVESTIGATION

For more infomation >> Construction worker critically injured after being struck by car on H-1 Freeway - Duration: 0:35.

-------------------------------------------

(Airsoft) Unboxing the HK45 Tactical Tokyo Marui - Duration: 12:03.

Thanks to them !

Hello YouTube, welcome to this new Unboxing video !

Today I show you the HK45 Tactical from Tokyo Marui

It comes from Impulse101 where it's available for 17380 yens, which is about 145 euros

This is a "tactical" variant of the HK45 I already showed on my channel

I really like the HK45 Marui and I decided to buy this model in order to build myself a hybrid between the two versions (more about that later)

Here is the box and now the inside of the box

We have the gun of course, we have the silencer, which comes with the HK45 Tactical, a magazine

We have a backstrap here (small), which point is to make the grip a bit smaller if you need

The gun comes with a threaded barrel on which you can screw the silencer, or the thread protector which also comes with the gun

The gun comes with a FDE color body, I don't think any other color is available right now

I prefer the black version, so in the end I'll use the upper of this version on the lower of the original HK45

As usual the packaging is really cool, it looks awesome and it also protects the products well

The booklet is under the polystyrene here

Let's put the silencer... The thread is 16 mm CW

And here is the HK45 Tactical

So, where to begin... What is the HK45 ? A pistol from H&K, basically the grandson of the MK23

It's a full size pistol chambered for the .45 ACP, which has a low capacity of only 10 rounds

In comparison a FN FNX45 carries 15 rounds of .45 ACP

The HK45 actually carries less cartridges than the USP (12 cartridges), which seems odd

I would assume that H&K made the choice to make the gun as comfortable as possible to hold, and the grip indeed feels very nice in the hand

I really like the ergonomics of the gun, which is one of the reason why I used it a lot in games

Also, in airsoft, having the replica of a double stack .45 pistol comes with an advantage : big magazines, which carry a lot of gas

So this is the HK45 Tactical, I brought the original HK45 so we can make a comparison, we'll see the few differences

The most obvious one of the color, black for the original, FDE for the tactical

The HK45 Tactical comes with a threaded barrel

We have an ambidextrous safety lever on the tactical model, it's only on the left side on the original

Which is actually something I prefer on the original model, I don't like the ambidextrous lever, especially when you want to decock the hammer

On the HK45, you have a safety you can put on whether the hammer is armed or not

And when the hammer is armed, pushing down the lever decocks the hammer

Very easy to do with the original HK45

But on the tactical model, my finger gets in the way of the lever, which doesn't make it as easy to use

It's not a big deal I guess, but between the two versions I prefer the non ambidextrous one

Another little detail : the rear sight, both models doesn't share the same one

You could think that the tactical model has higher sights, for easier use with a silencer on

But actually it doesn't, the sights are the same height on both models, despite the rear sight difference

It's possible to aim with the silencer on though

But why the rear sight is different... I'm not sure to have an answer

A little detail I like on the HK45 : here you have the typical H&K ambidextrous paddle mag release

I like to use my index finger to use it, feels natural enough to me

If you push the paddle very briefly, the mag will move just a little bit and will stay blocked inside the grip

I'm not sure to know if it's made on purpose or not, but the good thing is that if the paddle is pressed by accident, it lowers the chances you'll lose your mag on the field

Also, it's possible to adjust the hop up without removing the slide

The wheel is just here, you can adjust it with your finger, assuming it's thin enough

To disassembly the slide : remove the magazine, pull the slide and remove the slide release lever

Easier to move the wheel this way

A last detail on the HK45 : on a real HK45, the slide release lever makes contact with the slide just here

Since the real one has steel parts it's no big deal, but on this airsoft version, a metal part on a plastic slide wouldn't be a good thing

So on this Marui model, the "external" slide release lever doesn't actually act as a slide stop ; what actually blocks the slide is this internal part

It works as good and it doesn't damage the slide

A last difference between the two models : the external barrel

Apart from the threaded barrel, you can tell that the base of the barrel on the tactical model is a bit different

I'm not sure to understand what it does, but I'm going to assume it's here to assure a better cycling when you use the silencer

Marui acknowledged the fact that putting a silencer on will put more stress on the barrel and they did something about it

In general, when you put a silencer on your GBB it's not going to work as well, it will need more energy to cycle the slide

We'll see in the shooting video how it performs

I guess I said everything I had to say about the HK45 Tactical, which doesn't have a lot of differences with the original HK45 I alreadt own

A GBB I really like, good out of the box performances, good cool down resistance, nice kick, feels very comfortable in the hand

Now with this "tactical" model you have the possibility to make it a bit more fancy

The silencer itself is made of metal, yet it's still very light

There is foam inside

Of course, it's still a GBB, it makes a lot of sound from the blowback itself, putting a silencer isn't going to make it a lot more discreet

In Airsoft, silencers mostly work on NBB and bolt sniper rifles

But GBB, with or without silencers, always make a lot of sound

Thanks for watching and see you next time for the shooting video !