Sunday, January 1, 2017

Youtube daily report Jan 1 2017

After a year of dramatic referendums and political upsets, it is clear that 2017 will be a serious

change of pace for the Western world.

The five largest western economies, being the United States, the United Kingdom, Germany,

France, and Italy, have all seen big changes in their governments within the last year.

And only one member: Germany has any chance of keeping its current leader.

So, who exactly are the new Western leaders of 2017?

Well, first let's take a look at who is leaving their role as head of government.

In the United Kingdom, a referendum to separate from the European Union passed, causing Prime

Minister David Cameron to step down after supporting the effort to stay.

The United States has seen a dramatic shift of ideology from Democratic president Barack

Obama to Republican Donald Trump in the 2016 election.

In France, current President Francois Hollande (Fran-zwa - Holand) has said he will not seek

re-election in 2017, following his tenure as one of the most unpopular presidents in

French history.

And in Italy, Prime Minister Matteo Renzi tendered his resignation after a referendum

on consolidating power in government didn't pass.

Even German Chancellor Angela Merkel is seeing some of her lowest approval ratings in five

years, around 45 percent.

This sweeping change in the highest reaches of global politics reflects one, ongoing theme;

populism.

Many of the the newest leaders, or potential leaders are either further right than their

predecessors, or rapid departures from the past few years of rule.

The new UK Prime Minister, Theresa May, is of the Conservative Party, just like Cameron.

However she did not push as hard to stay in the EU, and is considered anti-immigration,

with her administration floating plans to force companies to create lists of foreign

workers in their employ, an idea which some are calling "racist".

In the United States, President-elect Donald Trump is supported by the growing alt-right,

which has been associated with white supremacy, and even fascist sentiments.

While French President Hollande, of the Socialist Party, has not yet left office, the primary

opposition frontrunner for the April 2017 election is center-right leaning François

Fillon, who has been described as "the right of the right".

Polling behind Fillon is Marine Le Pen, leader of the National Front, a nationalist, anti-immigration

party that has been called racist and antisemitic.

As for Italy, the new Prime Minister, Paolo Gentiloni is of the same Democratic Party

as the former PM.

The country will likely see a new election in or before 2018..

However, the failure of the referendum that ousted Renzi pointed to the growing popularity

of the Five Star Movement, a populist, anti-establishment, Eurosceptic party, which has said it is neither

left nor right wing.

Still, the party's presence and success is a strong deviation from traditional Italian

politics.

But there are still parts of the world where the opposite is happening.

Austria, for example, will see a new left leaning candidate as President, Alexander

Van der Bellen, after years of centrist rule.

His defeated opponent, Norbert Hofer, is considered a far right nationalist, and has said that

Islam has no place in Austria, and that the country would hold a referendum on independence

is Turkey was allowed into the EU.

Austrian voters rejected this narrative in what has been called "a heavy defeat of

nationalism and anti-European, backward-looking populism."

Still, for most major Western powers, 2016 saw the unprecedented, and by many accounts

unexpected rise of anti-establishment sentiments..

Although there are still more elections to be held in 2017, this changeover represents

a break in the status quo for much of the world.

Brexit, the election of Donald Trump, Italy's Five Star Movements and many other recent

political shake-ups are all a result of populist sentiments.

But what even is populism?

Find out in this video.

In Europe, it's generally more popular on the ideological right, which believes that

socialists or left-leaning policies negate the collective will of the people.

This was the idea behind the 2016 Brexit referendum.

thanks for watching Seeker Daily!

Don't forget to like and subscribe for new videos every day.

For more infomation >> Who Will Lead The Western World In 2017? - Duration: 3:58.

-------------------------------------------

Psychothérapie et Islam : Quand consulter un Psy? Un religieux? Dominique THEWISSEN - Duration: 5:07.

For more infomation >> Psychothérapie et Islam : Quand consulter un Psy? Un religieux? Dominique THEWISSEN - Duration: 5:07.

-------------------------------------------

Création de bijoux en pâte polymère avec Isabelle (artisanat) (w/sub) - Duration: 11:39.

Hello!

Today I'm taking you with me to Bereldange.

It's just north of Luxembourg-Ville .... Right there. And I'm meeting with Isabelle

who is a jewelry designer and who will tell me more about her job and show me how she works.

Let's go!

So the jewelry ... You told me there made with polymer clay?

It's polymer clay.

It is malleable and miscible as long as it is raw, which allows to create colors and create the shapes that one wants.

And then, once it goes into the oven, it hardens

And from there, there is a whole work of sanding, polishing, threading to get to the results we have here.

How did you come up with this desire? I love to create and always have to

do something with my hands. I was waiting for someone in a store when I saw

a book on polymer clay. And then I thought, "Well, why not? Curious as I am, I'll give it a try."

I never stopped, and even went to Canada to do

trainings. Oh waouh!! You created jewelry right away? Yes, very basic

jewels, very simple, and then one gains confidence, tames the material,

begins to understand that "I can do this, I can do that, I can try

another form than just round pearls". So we actually do what we want? We do

what ever we want. In shape, in color .... in everything. Imagination is the limit! Exactly.

On the shortest necklaces, a super system of magnetic clasp!

It goes all by itself. It's awesome! And it does not move? During the day it does not fall? It does not fall,

no, no, no, no. That's why just the shortest models

can afford to have such a clasp. And on the others it's more

conventional clasps? Yes. The demand is often carabiners wide enough

to be handled easily

I have a client who recently ... She saw this, she also saw this pair of earrings.

She asked me to turn the collar into a brooch, and the earrings, to make them mounted on clips.

Oh ok! so we can really do what we want. We can do what we want.

We're going to make a light pendant. We will start from two colors, yellow and red.

We're going to do a gradient.

First I have to cut my dough so that I can put the two colors together

The red being much stronger than the yellow, I will put less red than yellow.

I reconstituted my rectangle, roughly, so I fold, and we will go into the machine

Rule number 1: always with the fold down to avoid making air bubbles.

I put it into the machine. I'll have to spend 15 to 20 times

- oh ok!! - and each time, always this same movement

Now the gradient has been obtained, I'm going to texture with this rubber pad

I will cover that part. So I'll put my dough on my working plan

Will it reduce by cooking or not? Not at all. Okay.

I pressed the pad well on the dough. Now I remove the stamp ... and we have the drawing.

I'm gonna cut more or less the shape I want for my pendant.

Now it must be cooked. So, the support for cooking.

I do not want a pendant that is all flat, so I put my piece on the PVC

and once it is cooked, it will have this shape

So when we do a project like this, we already think about threading and

I rolled two pearls, a red one and a yellow one that will be used to make the finish

near the clasp. So we're going to cook for ....? For 40 minutes. The oven is at

a temperature of 130 ° C.

So the pendant was cooked. It has cooled down

Now, we will create a support at the back that will allow the threading and we will cover the piece

with black acrylic paint.

And I take it off ... Here, we have a tube that

will be fixed to the back of the piece that is here.

To glue baked material to raw material, liquid polymer paste is used

which I apply like a glue

And now I take black acrylic paint,

and I'm gonna spread it on my pendant.

It has to be cooked again 40min at 130 ° C.

Welcome to my bathroom! That's where I do all the sanding work

So, it was taken out of the oven, the paint was fixed with the cooking, the back part

also. So now it no longer fears water. I put it in the water and I will take

the three different papers with which I will sand.

The sanding is complete. I'll dry the pendant and we'll shine it now.

So it's going to make some noise. I'm just gonna let it spin and pass the piece over so that

the fiber rubs well over the whole piece. It will take 2 to 3 minutes.

So now we will proceed to the assembly

We have a rubber tube, a metal cable, a magnetic clasp,

the little pearls that will finish the rubber, and

beads to crush. I will start by taking the measurement of the rubber tube.

In general I put 46 to 47cm

Before the clasp, I will thread each of the end beads.

And so that everything holds, I have to put pearls to crush.

My magnetic clasp ....

I'll do the same thing on the other side

Here you are

You still work in a bank ... I work in a bank, yes, because

unfortunately I can not live from my activity. So I have to ensure a minimum.

I work part-time in a bank, and the other half time is for my passion.

You made the choice of being filled and happy ...

.. doing things that I like

against the fact of having more money yes. More money ... and we work all day, we work

all week, every month, years pass without being seen and then

we accumulate money or we stupidly spend it in things that are not necessary.

Is it difficult to reconcile a family life, a part-time job and

a job-passion where you do not necessarily count hours? I do not count my hours. I was going to say,

it's not difficult when you know that what you do makes you happy. For my being happy is

to spend hours to create, to imagine ... When I go jogging I create,

when I sleep I create, and I always have ideas, I must be active

all the time ... So I really feel like ... I feel that I live

fully. And I often said, if it something happens to me now,

I'd still like to do a lot of things, but if I were to leave now I could

say « great! I did a lot of things that made me happy » and if it is the time

to go well, I'd have to go but .... You are satisfied with your life, you are

happy with what you have achieved? Absolutely.

Thank you very much Isabelle! - With great pleasure!

For more infomation >> Création de bijoux en pâte polymère avec Isabelle (artisanat) (w/sub) - Duration: 11:39.

-------------------------------------------

'La La Land' Trailer

For more infomation >> 'La La Land' Trailer

-------------------------------------------

Check Out We Love You

For more infomation >> Check Out We Love You

-------------------------------------------

Complementary mill cut with shaper cutters. - Duration: 6:54.

For more infomation >> Complementary mill cut with shaper cutters. - Duration: 6:54.

-------------------------------------------

Samsung 4300 прошивка - Duration: 4:16.

For more infomation >> Samsung 4300 прошивка - Duration: 4:16.

-------------------------------------------

Création de bijoux en pâte polymère avec Isabelle (artisanat) (w/sub) - Duration: 11:39.

Hello!

Today I'm taking you with me to Bereldange.

It's just north of Luxembourg-Ville .... Right there. And I'm meeting with Isabelle

who is a jewelry designer and who will tell me more about her job and show me how she works.

Let's go!

So the jewelry ... You told me there made with polymer clay?

It's polymer clay.

It is malleable and miscible as long as it is raw, which allows to create colors and create the shapes that one wants.

And then, once it goes into the oven, it hardens

And from there, there is a whole work of sanding, polishing, threading to get to the results we have here.

How did you come up with this desire? I love to create and always have to

do something with my hands. I was waiting for someone in a store when I saw

a book on polymer clay. And then I thought, "Well, why not? Curious as I am, I'll give it a try."

I never stopped, and even went to Canada to do

trainings. Oh waouh!! You created jewelry right away? Yes, very basic

jewels, very simple, and then one gains confidence, tames the material,

begins to understand that "I can do this, I can do that, I can try

another form than just round pearls". So we actually do what we want? We do

what ever we want. In shape, in color .... in everything. Imagination is the limit! Exactly.

On the shortest necklaces, a super system of magnetic clasp!

It goes all by itself. It's awesome! And it does not move? During the day it does not fall? It does not fall,

no, no, no, no. That's why just the shortest models

can afford to have such a clasp. And on the others it's more

conventional clasps? Yes. The demand is often carabiners wide enough

to be handled easily

I have a client who recently ... She saw this, she also saw this pair of earrings.

She asked me to turn the collar into a brooch, and the earrings, to make them mounted on clips.

Oh ok! so we can really do what we want. We can do what we want.

We're going to make a light pendant. We will start from two colors, yellow and red.

We're going to do a gradient.

First I have to cut my dough so that I can put the two colors together

The red being much stronger than the yellow, I will put less red than yellow.

I reconstituted my rectangle, roughly, so I fold, and we will go into the machine

Rule number 1: always with the fold down to avoid making air bubbles.

I put it into the machine. I'll have to spend 15 to 20 times

- oh ok!! - and each time, always this same movement

Now the gradient has been obtained, I'm going to texture with this rubber pad

I will cover that part. So I'll put my dough on my working plan

Will it reduce by cooking or not? Not at all. Okay.

I pressed the pad well on the dough. Now I remove the stamp ... and we have the drawing.

I'm gonna cut more or less the shape I want for my pendant.

Now it must be cooked. So, the support for cooking.

I do not want a pendant that is all flat, so I put my piece on the PVC

and once it is cooked, it will have this shape

So when we do a project like this, we already think about threading and

I rolled two pearls, a red one and a yellow one that will be used to make the finish

near the clasp. So we're going to cook for ....? For 40 minutes. The oven is at

a temperature of 130 ° C.

So the pendant was cooked. It has cooled down

Now, we will create a support at the back that will allow the threading and we will cover the piece

with black acrylic paint.

And I take it off ... Here, we have a tube that

will be fixed to the back of the piece that is here.

To glue baked material to raw material, liquid polymer paste is used

which I apply like a glue

And now I take black acrylic paint,

and I'm gonna spread it on my pendant.

It has to be cooked again 40min at 130 ° C.

Welcome to my bathroom! That's where I do all the sanding work

So, it was taken out of the oven, the paint was fixed with the cooking, the back part

also. So now it no longer fears water. I put it in the water and I will take

the three different papers with which I will sand.

The sanding is complete. I'll dry the pendant and we'll shine it now.

So it's going to make some noise. I'm just gonna let it spin and pass the piece over so that

the fiber rubs well over the whole piece. It will take 2 to 3 minutes.

So now we will proceed to the assembly

We have a rubber tube, a metal cable, a magnetic clasp,

the little pearls that will finish the rubber, and

beads to crush. I will start by taking the measurement of the rubber tube.

In general I put 46 to 47cm

Before the clasp, I will thread each of the end beads.

And so that everything holds, I have to put pearls to crush.

My magnetic clasp ....

I'll do the same thing on the other side

Here you are

You still work in a bank ... I work in a bank, yes, because

unfortunately I can not live from my activity. So I have to ensure a minimum.

I work part-time in a bank, and the other half time is for my passion.

You made the choice of being filled and happy ...

.. doing things that I like

against the fact of having more money yes. More money ... and we work all day, we work

all week, every month, years pass without being seen and then

we accumulate money or we stupidly spend it in things that are not necessary.

Is it difficult to reconcile a family life, a part-time job and

a job-passion where you do not necessarily count hours? I do not count my hours. I was going to say,

it's not difficult when you know that what you do makes you happy. For my being happy is

to spend hours to create, to imagine ... When I go jogging I create,

when I sleep I create, and I always have ideas, I must be active

all the time ... So I really feel like ... I feel that I live

fully. And I often said, if it something happens to me now,

I'd still like to do a lot of things, but if I were to leave now I could

say « great! I did a lot of things that made me happy » and if it is the time

to go well, I'd have to go but .... You are satisfied with your life, you are

happy with what you have achieved? Absolutely.

Thank you very much Isabelle! - With great pleasure!

No comments:

Post a Comment