- So we are back at Skyway Yacht Works.
(upbeat piano music)
Moment of truth right here.
(upbeat piano music)
- [Kirk] I wonder if we broke the line.
- [Lauren] Okay, let's back up here.
How did our boat end up in slings
back at the same yard we just left
when we were supposed to be on our way down the river?
Here we are in our last episode,
getting through our first lock on the Calumet river.
And then, with only a few feet to go
to reach the marina where we planned to spend the night,
the boat just stopped.
Hey love.
- Yeah.
- [Lauren] What the heck is happening at the moment?
(laughing)
- We're having our first boat moment.
I don't know, is that what you call it?
- [Lauren] Sh*t breaking out a boat moment?
- Yeah.
Intro to cruising life, here. - Yeah.
- We unstepped our mast yesterday,
and our centerboard line runs through the mast.
So we read that you have to wrap a line around
the hull of the boat to hold the centerboard up,
which we did, and snugged it up.
But we didn't leave any of the centerboard down,
so we started motoring again and the line just slipped off
and our centerboard went down.
- [Lauren] So last night when we hit bottom,
we had an inkling this is what happened.
We tried to do some recon to confirm the board was down.
It was incredibly murky, and the light we were shining
was just reflecting off debris in the water.
On our second try, we got wise,
putting the light on one side of the boat
and the GoPro on the other.
Instead of drafting four feet and a few inches,
we were drafting almost eight.
Before continuing down the river,
we had to get the board back up.
- [Kirk] This was the mast plug we created
to run the centerboard pennant back up to the deck.
This piece of crap that didn't fit
was jury-rigged, was held together
with PVC cement and Life Caulk.
In a rush to prep the boat for the mast unstepping,
when it came time to finish this thing and try it out,
it didn't work.
The plug was too small, and the weight of the centerboard
kept popping it out of the partners.
Because we had already stayed as long
as we could at the yard,
we decided to tackle rebuilding the mast plug
at our next stop.
We thought we'd be fine, but clearly not.
- [Lauren] Okay, so the other thing
you might be wondering is, if you know the board is down,
why don't you just pull it up?
We tried.
The pennant wasn't budging.
- We're less than 24 hours into our motor south
and we have already run aground,
we already stayed overnight at a lock
we weren't supposed to,
we're already backtracking,
and we have to go and find ways to get to
get all of the parts that we need
without a car, without transportation,
and beg, borrow, and...
Well, we probably won't steal stuff, but...
Get everything we need to fix everything
and start heading south again.
So, we are now headed north,
which is the wrong way.
But, thankfully last night, we tied up to the lock,
we met a very nice lock tender
at the Thomas O'Brien lock,
named Andy, who allowed us to stay
at the very very end of the...
I don't know what this is, the pier here?
- [Lauren] Don't worry, Andy, we'll bleep your name.
(laughing)
- Yeah Andy, we will bleep your name, Andy.
Don't worry, we won't ever say Andy.
But there was absolutely no boat traffic
and dead calm all night,
so we actually got some sleep.
But the lock's opening now.
- [Lauren] I got a really nice seven hours, I think.
- [Kirk] Look at the water come rushing out of there.
Do you see the difference in height?
It's kinda crazy.
I can see about a foot difference in height
where it's rushing down.
- [Lauren] I don't have the telephoto on.
It's pretty hard to see.
- [Kirk] Yeah.
Alright, we should get ready though.
- [Lauren] Alrighty.
- Can you switch us over to two?
- [Lauren] Mm-hmm.
- And take that?
- [Lauren] Yup.
(humming)
- [Kirk] We're gonna do both.
Er to "Both" sorry not "2"
- [Lauren] Yup.
- [Kirk] We're on "Both"?
- [Lauren] We're on "Both".
(beeping)
(engine revving)
- That's always a nice sound.
- [Kirk] Are you gonna do the lines or am I?
- Whatever.
- [Kirk] Do you have shoes on?
- I have moccasins.
- [Kirk] So do I.
(upbeat guitar and drum music)
- We motored right past Skyway over to Crowley's,
to see if we could get some hardware
for our new mast plug.
Thank goodness it's not raining or snowing.
Bigger or anything that I can buy or borrow?
Can I get a two by six or two?
A little short piece?
Well I just...
So my mast is...
Just to cover the mast base.
So it doesn't need to be long.
Our centerboard fell down,
and then our line got snagged and now we can't move it.
So it's stuck all the way down
and we're drafting like eight feet.
'Cause we only draft four foot with it up.
- We showed up right as the shipping company,
Albert Logistics, was loading up all the masts.
Believe it or not, at that very moment,
our mast was being lifted onto the truck.
It made me really happy to be able
to see our mast being loaded.
You could tell they were taking
good care of our precious cargo.
That's our mast!
Awesome.
Cool!
I'm meeting Albert from Albert Logistics!
Nice to meet you.
- There you go.
- Thank you so much, I appreciate your care.
- [Albert] Take care.
- So we are back at Skyway Yacht Works,
after thinking we were on our way south.
We're back at this yard because they were the only place
that had a deep enough depth next to their dock
that we could get our boat in
with our centerboard being down.
(sighs)
Um, yes.
I don't know where to start with these guys.
They have been absolutely wonderful.
They let us stay overnight at their dock
while we prepped our mast ourselves,
they let us hook up to their electricity,
they let us change the day that we were arriving.
We called them up again this morning,
telling them about our problem.
The guy, I think Mark was his name?
He's like, oh yeah, come on up,
we'll let Steve know that you're coming
and we'll have space for you.
Like it's the busiest time of the season
and they're pulling like,
a dozen boats out of the water a day,
and we got a little spot on the dock here
so that we can try to fix this problem
with our centerboard.
We went up to Crowley's.
The rigging master there, I don't know his name,
but we told him our problem and he's like,
oh yeah, I think I've got some blocks for you.
And we're like, we need some wood too,
and he's like, oh yeah, I got some wood for you.
Just gave us all the stuff,
and it's been going pretty well so far.
- This is a really nice saw.
Let's hope that fits in there almost perfectly.
It'll be close.
Okay, we're gonna sand these if this doesn't work now.
- [Lauren] Okay.
- We're very close.
You wanna go down there and catch 'em?
- [Lauren] Yes.
Okay.
- [Kirk] You gotta be kidding!
- [Lauren] Still not?
- It seems like it fits worse and worse each time.
(laughing)
- And then we're gonna line up the next one, okay?
Okay, can you go down and trace that?
Oh, look at that!
That is perfect.
Exactly where we want it.
So we've got two pieces of, I don't know what this is,
three quarter inch ply, to go inside the mast plug.
One that sits on top, we've cut a hole through the center.
We cut a little penis thing here,
so that our wheel can go spin freely.
The centerboard pennant will come up through here,
go over this exit sheave,
and then out to our deck organizers
and to our centerboard winch.
And we're hoping that this crappy worthless screws
we've got here are gonna hold it.
And our free, new to us exit sheave is not too janky.
- [Lauren] Because it needs to pull up
a 200 pound centerboard out of the water.
- Yes.
I only have five screws, is there one in the...
- Let's hope so.
- [Kirk] I hope this works.
- Moment of truth, right here.
We were really hoping that with a more robust mast plug
fitted with an exit sheave,
we would be able to pull the board up.
(line creaking)
This wasn't a good sign.
The line wasn't lifting the board,
it was only getting more taut.
Kirk proposed one last-ditch effort.
- Let's take these lines off again,
- [Lauren] Okay.
- And let's run it back from the bow,
and just make sure we're on the board,
and then let's just try and give it a little jiggle.
- [Lauren] Okay.
But the line didn't appear to be moving
and we couldn't see anything underwater.
At this point, we didn't have much choice
other than to haul out.
(dramatic rhythmic music)
- Yeah, you see it?
We're pulling it forward, yeah.
(dramatic rhythmic music)
- [Lauren] Oh my god.
- I think it's pinched up, up front here.
- That looks terrible.
- When we were cranking on it,
we were pulling the board forward.
God, that's our home hanging 20 feet in the air.
So that's why pulling on the rope backwards,
it was just going up into it.
It wasn't coming...
- [Lauren] Right.
(dramatic rhythmic music)
- Yeah, you know what?
I think if we get up there and loosen that,
so we can pull it out a little bit
so it's not the hose, it's just the line.
- Yes.
Yes, yes, yes, alright.
(dramatic rhythmic music)
- [Kirk] Alright Lauren, tell me when you're on the winch.
- [Lauren] Oh, there goes the ladder.
- [Kirk] We're gonna lose the ladder.
Re-loosen it.
- [Lauren] Yeah.
- [Kirk] Alright, I'm gonna keep coming.
(dramatic rhythmic music)
Alright, pull tight!
(dramatic rhythmic music)
Keep going!
(dramatic rhythmic music)
Alright, so...
We are underway through the industrial...
I don't know, armpit of America.
Really terrible smells every 10 minutes.
Something new, electric, chemical,
just garbage, all sorts of nasty stuff.
And we spent the last, I don't know, four days here?
We spent all day building this.
This is version one,
and this bad boy is version two.
So hopefully that gets us all the way down to Mobile.
So we spent all day building that
and we rigged it all up,
and the board was still stuck.
So we got the boat in the air,
saw the centerboard was hanging forward at about 45 degrees,
and it ended up being a very easy fix.
It wasn't stuck in there very hard at all.
We pulled the centerboard forward a little bit
and then we could easily get the line back up,
and all was set.
We were in the air for about five minutes and it was fixed.
So here's hoping we don't have to deal with that again,
but, I think if we do I've got a better idea
of how we can fix things now.
I think if it gets stuck, and we can figure out
if it's all the way forward,
we actually just need to loosen everything up,
and if we're in a spot that we can get
in the water it's a very easy fix.
If we can't get in the water,
it's a little bit more tricky,
but we might be able to get a boat hook on it
and pull the line back or something,
and get us re-sorted.
So we'll see.
Fingers crossed we don't have
to go through that again, though.
Well, 24 hours later, we're back, 10 feet closer
to the dock, tied to the dock than we got last night.
Another beautiful night with a beautiful sunset,
and hopefully this time we can continue south.
But check this out.
[Loud hum of motors]
It's gonna be hard to see,
but there's about a 1,000-foot long barge
and tow that are pulling into the lock right now,
and if we were docked there
like we were last night,
we would've been absolutely crushed.
We were so lucky last night
that it was dead calm and nobody came by.
(sighs)
Thank our lucky stars.
(upbeat electronic music)
No comments:
Post a Comment