Hello friends ! If you like this channel music please like & share, subscribe channel. Thanks you very much !!
For more infomation >> Cách Chữa Chảy Máu Cam Cho Trẻ Em Và Người Lớn Từ Lá Tre - Duration: 2:30. 
For more infomation >> Renault Scénic 1.6 Expression - Duration: 0:59. 
For more infomation >> Volkswagen Polo 1.2 TSI BlueMotion Comfortline - Duration: 1:00. 
For more infomation >> Uomini e donne, a sorpresa Giorgio invita Gemma a cena | K.N.B.T - Duration: 4:52. 
For more infomation >> Ford Focus Wagon 1.6-16V Futura - Duration: 0:48. 
For more infomation >> Romina Power: ecco quali sono i progetti futuri dell'ex moglie di Albano Carrisi | K.N.B.T - Duration: 4:04. 
For more infomation >> Vincitore GF Vip: cambia tutto, ecco chi è in testa | WInd Zuiden - Duration: 3:31. 
For more infomation >> Seat Altea 2.0 FSI Stylance - Duration: 1:01. 
For more infomation >> Renault Scénic 1.6-16V Authentique - Duration: 1:00. 
For more infomation >> Sự Thật Về Bài Thuốc Bìm Bìm Ngâm Rượu Giúp Bổ Thận Tráng Dương - Duration: 6:23. 
For more infomation >> GF Vip, malore nella notte: 'Basta, voglio andare via' | WInd Zuiden - Duration: 3:22. 
For more infomation >> Ford Transit Connect T200S 1.8 TDCi Trend - Duration: 0:54. 
For more infomation >> Opel Astra 1.4 Turbo 120pk Anniversary Edition 5 Drs. - Duration: 1:01. 
For more infomation >> Opel Agila 1.0 Berlin - Duration: 1:02. 
For more infomation >> Peugeot 207 1.6 VTi Look - Duration: 1:00. 
For more infomation >> Grande Fratello Vip: Ignazio ha già conosciuto Belen? Ecco la risposta | M.C.G.S - Duration: 3:32. 
For more infomation >> Opel Meriva 1.6 16V 77KW Cosmo | NAVIGATIE | LM VELGEN | - Duration: 0:54. 
For more infomation >> Opel Astra TwinTop 1.8 COSMO,AUTOMAAT,AIRCO ECC,LM VELGEN,CRUISE C - Duration: 0:54. 
For more infomation >> Jeep Compass 2018 fica mais econômico e conectado - Duration: 2:08. 
For more infomation >> Hyundai i30 ganha versão para rivalizar com Golf GTI - Duration: 2:08. 
For more infomation >> Os automáticos e automatizados mais econômicos do Brasil - Duration: 1:13. 
For more infomation >> Novo Mercedes-Benz CLS tem estilo de cupê e interior de sedã - Duration: 2:08. 
For more infomation >> Primeiras impressões Audi A5 Ambition Plus – Esqueça o volante - Duration: 7:54. 
For more infomation >> Volkswagen Polo 1.2 TSI 4 CIL TURBO BLUEMOTION COMFORT EDITION AIRCO - Duration: 0:59. 
For more infomation >> Dîtes votre avis ! [AMV] - Fairy Tail - One Piece - Dragon Ball Super - Duration: 7:43. 
For more infomation >> How To Prep Vans For Paint |...
For more infomation >> [HD][VOSTFR] KISSES - Hope You're Ruined (Ft. Sik-K) - Duration: 3:08. 
For more infomation >> Mercedes-Benz CLC-Klasse 180 K. Aut Prestige 1e EIG XENON LEDER PDC AMG FLIPPERS '09 - Duration: 0:58. 
- [Kristina] Hi everyone, Kristina here.
Welcome to another video for my YouTube channel and blog.
Today I'm using this new die called
Sensational Snowflake Collage,
and this is a brand new die for
Simon Says Stamp's Diecember release.
In fact, this video today is a blog hop,
so if you would like to see
even more inspiration for more products from this release,
make sure you head over to my blog
so that you could hop along.
So, I'm going to be making
two different versions of the shaker card today.
One is a little bit more complex,
and one is fairly simple.
I'm starting out by cutting this die
out of some Nina Solar White 80 pound card stock.
This card stock is cut to five and a half inches wide
by four and a half tall,
and I just positioned this die kind of
more near the top portion, a little bit off-center.
And I'm gonna die cut this twice.
Both of these cards will have the same design,
but just the shaker elements
will be a little bit different.
As for the greeting, I'm using the Fa La La stamp set
from Simon Says Stamp,
and I'm using the greeting that says
"Sending Christmas Wishes."
I think that's what it says.
And I'm stamping this in some Versamark ink,
and then I'm going to coat it
in some Sterling embossing powder from Brutus Monroe.
This is a really pretty silver embossing powder.
Oh, it says "Sending Merry Christmas Wishes."
I forgot the "merry" in there.
I'm gonna heat set that
until it's completely smooth and melted,
and once again, I'm doing this exact same thing
to the other card front as well.
I'm now cutting some window plastic
for transparency or a window sheet.
This is actually heat-resistant acetate.
This is from, I think it's Hot Off the Press,
I think that's who it's from.
I'll have that linked down below
in the supplies section at YouTube
and also at my blog, if you're looking for
some of this clear acetate for your shaker cards.
And I just cut that to be three inches tall
by five and a half wide.
I'm now adhering the window plastic or the acetate
to my card front.
I've turned it over to the back side,
and I'm using some Ranger multimedia matte adhesive,
and I'm putting little dots of adhesive
on the ends of the snowflake,
and also around each top and bottom of these boxes,
then pressing that down onto the card stock.
I'm gonna make sure that's pressed really well
so that it adheres and everything is stuck down.
I'm now gonna take some foam tape,
and this is when things start to get
a little bit complicated.
I'm gonna first show you the complex version,
and then I will show you the more simplified version.
For both of these, you're going to need
double layers of foam adhesive.
So, I have this foam tape here that I have
folded over and doubled over on itself,
and then I'm cutting it into small, narrow strips.
The areas in between the snowflake boxes
are very, very small,
so you have to cut the foam tape as small as you can
in order to have the divisions between the boxes.
So, I'm cutting those down, and then I have
slightly wider pieces,
it could also be very narrow as well,
and I'm putting that at the top
and bottom of the boxes.
I'm just using my scissors to
cut those off to the right length.
These don't have to be super precise and sealed tight,
because I'm going to be using sequins.
I'm not using glitter, or seed beads that are really small,
or anything that would slip through those corners,
so you don't have to be perfectly precise,
but just make sure you have a good frame
around each one of these sections.
You want it to be pretty close to all the corners,
but if there's a little bit of a gap,
it's not the end of the world.
And then, to finish up the areas on this card front,
I'm putting some foam adhesive
on the top and bottom,
and this is because this is going to go
directly onto a card front,
so I need to have the same level of foam tape
on those top and bottom as what's around the shaker area.
So eventually, I'll actually put
two layers of foam tape there.
For the more simplified version,
I'm not doing the divisions in between
all of the little sections.
I'm just going to have it be one big shaker area.
And to fill these little gaps in the corners
because my narrower strips were too short,
I just put in a little bit of extra adhesive.
So, I'm gonna double up on all of these extra areas
to make sure that they're the same height,
and the reason why I'm using a double layer of foam tape
is I want there to be a little bit of room
so that the sequins can move around.
If you only do one layer of foam tape,
the sequins will kinda get stuck
and they won't move around.
In order to have enough height
so that they can move freely,
you have to have two layers.
And then I'm using my antistatic powder tool,
just to add a little bit of powder
to the outer edges of all of this foam tape,
and that's going to help it so that
the edges aren't sticky,
and the sequins stick to them
once everything's put together.
I'm gonna take a little break from the shaker area
and create my card bases.
This is made out of some Nina Classic Pressed Solar White
card stock in the 110 pound version,
and I just scored that at five and a half.
And then I'm going to use this glitter paper
from Simon Says Stamp.
This is part of their release.
I showed it in yesterday's holiday card series video
with all those colorful glitter papers.
Today I'm using the white glitter paper,
and you'll see what I do with that in a minute.
For now, I'm gonna use this pack of sequins from
Little Things by Lucy's Cards,
and this is the one that's called Enchanting.
I'm gonna put quite a bit of this all in this area,
'cause it's a really big shaker card,
and I want a lot of that color to show up.
So, I am kind of moving the sequins around,
making sure they're a little bit more flat.
I don't want any big mounds of sequins that would get stuck
once everything's put together.
I'm now removing all of that foam tape,
and then I'm going to take that glitter card stock
that I cut earlier, and I've actually cut it to be
three inches tall and five and a half wide,
basically the same size of that
window sheet or acetate that I cut earlier.
And I'll place that over the top,
and press that down onto all the foam tape.
I wanna make sure that I get the entire frame
really pressed in, so that it seals in all of those sequins.
So I'm gonna press that in and then I'll turn it over
and you can see how beautiful it is.
And by having the glitter paper as the background
on the very back of the shaker card,
you're always gonna get a little bit of sparkle,
so no matter where the sequins end up,
yoU know, if you have the card
standing up on a table or on a mantle,
you'll still get quite a bit of sparkle
from that glitter paper,
because all the sequins will have moved
to the bottom of that shaker area.
Adding some adhesive to the back of that glitter paper,
this is some Tombow Extreme Adhesive,
and then I'm going to press it onto the front of my card,
and I'm just standing these up
so that I can get them on there just perfectly,
and then I'll press those together.
So, this is the first card all finished,
the more simple shaker card.
And now I'm using the more complex one,
and I'm gonna use five different packs
of these sequins mixes.
I've got Peach Schnapps, Pink Lemonade, Lagoon,
Apple Ice, and then I'm also using some Lily White,
and the Lily White is turned over in the little baggie,
but that's the one that's on the far right.
So, I only need a very small amount
of these sequins mixes for each one of these boxes,
because they're such a small area.
So, I'm going to put these in kinda rainbow order,
so I've got red, kind of a peach or orange,
green, blue, and then I'm gonna end with the white.
You could definitely add in a purple,
but I kinda like that this white mix
had a little bit of a purple sheen.
So, as you're putting this together,
you wanna make sure that all of the sequins
stay away from the foam tape,
because you don't want any of them getting trapped
when you put down that glitter paper.
So, after I've peeled off all of this foam tape,
I'm gonna go through with my scissors,
just using them as a pointer,
and I'm gonna make sure everything is in those
kind of welled areas for the shaker,
make sure that everything's away from the foam tape.
Then I'll press that glitter paper down once again,
and that seals up all of those shaker areas.
I wanna make sure I press down,
and I can kinda feel underneath,
that's why I run my fingers over it.
I kinda feel where all of those divisions are.
So, that sorta created like a rainbow effect
with all those sequins,
and I'm gonna press this down onto the card front.
I put some more Tombow Extreme Adhesive on the back,
just like I did with that first card,
and then press that together.
So, those are the two cards for today.
Like I said before, this is actually a blog hop
for Simon Says Stamp's Diecembeer release,
so if you would like to see even more inspiration
with lots of die cutting,
please head over to my blog and hop along.
Thanks so much for watching.
I will see you Monday for a new video
in the Holiday Cards series.
(cheerful music)
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment