An Giang info: Youtube daily report Feb 14 2019

Om Nom - St Valentine's Special - Scrapbooking

For more infomation >> Om Nom Stories: St Valentine's Special - Scrapbooking | Cartoon Shows For Children - Kids TV - Duration: 2:39.

-------------------------------------------

Incredibly Beautiful Barnwell Park Home from Tingdene - Duration: 4:36.

ncredibly Beautiful Barnwell Park Home from Tingdene

For more infomation >> Incredibly Beautiful Barnwell Park Home from Tingdene - Duration: 4:36.

-------------------------------------------

Reloj en plato de arcilla y porcelana fría - Duration: 58:30.

Hello the creative people I hope everyone is find very well, today's project

It is very artisanal because Lili and I in the past

we belong to an organization of artisans here in my country then

We wanted to take up these roots and elaborate something like this, this watch is focused on the

part of autochthonous of my country in figures representative you also if

they want in every country they have pictures or cultures and they have those icons

representatives can apply them to make a watch similar to this or if

are from here (Colombia) so you can do it like that if you wish I hope this

project please and that they accompany me until the end

Well friends for this project we are going to use a clay plate

approximately about 25 centimeters in diameter and this one we are going to make a

piercing right in the middle we're going to make a hole can be with a

screwdriver as well as I taught them when I made the tile or the people who have not

seen the video you can see in the here they I'm going to leave the link so they can

watch the video of how to make a tile or how to decorate a fabric then in this

What I did was pressure with a screwdriver keep doing the

hollow ready and piercing it or if you guys they prefer they can do it with a drill and

with a drill the size of this hole must be according to this the mechanism that

let's put this is a mechanism for the clock

then the gap we must have in account that our mechanism between very

well this for the hole

because already having this hole we must make another two if you want

take this measure then we are going to divide the plate taking into account the

ruler and the center hole then let's mark

let's mark the center and equal way let's take out this other center and

already having this measure approximately of the measure that we made here of the

mark up are four centimeters ready 4 centimeters and

four centimeters there we are going to do the hole

the hole I did with a separation more or less than half an inch

from the end and my first when we do these

holes we must be careful not to make a lot of pressure on the plate

because we can start it ready friends already with these holes

then we can continue to place the cord

good then to place the cord we are going to use a nylon cord that

be resistant and in this way what we introduce on this side and here we go

to knot we tie a knot that fits very strong will not be released

we do double knot

we try that inward this part we can cut a surplus that we

stay and with a lighter we will burn the tip so you do not get messed up

yes then we try to hide a little more

and he stays watching now let's introduce the other end of it

way over here

and we're going to let it be straight but without tempering this then we let

enter into its normal state and we can look when the one that I hung the bar to

take this form ready so you do not we leave the field and so we leave

very long a 'tweet' when we hang it in a slow pass

we leave it where naturally and so we do the

knot

it's a normal knot

are not we all

what we are good and that when the time does

I share we cut

because I like to play chereau tips

so that it does not disarm

since it was this part done now we can continue with the decoration in

the front part to decorate this part then what

let's do is take the lines that we did as a guide at the beginning when

we divide the plate so in the four tips then these lines are going to

extend forward to make them look here ready then we extend the line

to see where they are and then we're going to draw two concentric circles here in

this part for example I to do these circles help me with a lid

a stage of anything you have then so and so can you

help you with a pot with a car what what do you have then we put

simply and we trace with a pencil the circumference and the other one we have it in

account so that it is concentric equal so that we stay like this and now then

what we are going to do is start paint this part

first let's paint this circle the center white and the one that follows what

let's paint with light brown then we are simply going to apply

to cover it completely is a basis about which we will work

let's do this step after we paint this we let it dry

after painting this part and leaving it dry very well now what are we going to

to do is to make a design about this white part in which we are going to

use these colors I'm going to use red yellow green and

blue ready then this design that I I'm going to leave them in the

description of the video so that you if they want to do it anyway they use it or

can create their own design so I'm going to take out a part like that

and here we can take

The important thing is that we do not have too much even we are not going to stay

and curves will not be very symmetrical in this way

I do not know if you can see thanks to this design and now what

let's do is start painting each part ready then for example I'm

part of here up I'm going to paint it green is yellow

in the center he painted it in red circle I'm going to leave white here what

I'm going to paint blue and down here also green

good friends after having already painted this part what we are going to do is

delineate it then we take the color black and we're going to start delineating

all the joints here in the center of the circle over here let's delineate with

you're all ready so it does not matter that the line does not

we are perfect that a little

uneven look that colors do not they were not full either because of what

we paint on a white base then we are going to outline some lines

can be thin others can get thick

well with this finished now what let's do is decorate the edge of the

circumferences of both the edge of this part like this and what we're going to do

is to take a brush from the end of the brush and with a bone color let's start

make points all around the circle

so we are simply doing together

so that this part that a little more than coral

we are going to make points in the internal part also with this same color

already when we finish placing the points in the contour of the

circumferences then let's do some decorations I'm going to make

figures to paste in this part that does not we painted this then now we must

take special care well work in the correct part then the part of

above our clock will do this that's where the rope is ready

then already with the marks that we extended to know where are the

four points then with that we're going to guide to stick the figures the

figures support her to elaborate with the dough cold porcelain

good to elaborate then the figure As the porcelain mass we are going to

Knead it a little

we must take pieces also them I recommend we should also have covered

the mass so I do not know what the contact with the air she begins to

dry up then let's move here

and what I'm going to do is a figure of a macaw then

initially we spent a little

and then we're going to start giving shape

if it is a figure that will cover from where is the cord to look where

is the line and down we go to more or less, about 10 centimeters

maximum then let's start to knead and shape

and take out the peak and suddenly we can go slowly so that you go

taking form

initially I will make the body then I'm going to take out the wings and the

tail

we can not let it be so thick figure

we can go flattening

we will also be working with these instruments suddenly for

work the porcelain with you the You can find out in stores

of crafts here you can find them you can find

then we are giving the form

well when we have the form that we want then we are going to hit

so let's apply a little bit of white glue on the back

and this will hold us very well figure

when it dried

we are going to look for it well

we get a little bit of glue not it matters because when it dries it stays

transparent and then we place it in the position

What we want

if we can continue placing the other pieces of the haystack

it's a macaw what I'm doing here we press it a bit so that

take the shape of the plate

and here we continue for example in the part of the eye with skewer stick with

the flat part let's make pressure

the impression it gives marked where the eye will be

and we continue marking

so where is the peak edition going

cold porcelain and let's make the tall

simply with the imagination as if we were working with play dough

we are going to make the pieces after we are going to paint there is also another way

to work the micron portion or the cold porcelain that is mixing it with a

little paint can be paint at oil and in the

we mix it well so that it gives color so in this case what I'm

doing is working the independent for the final painting

yes

here the wing

and let's also make the tail ready I already hit the tail here, I made three

strips and I glued them with the glue of same way and join them a little bit with

this instrument or with one that you have tipped then let's

start carving a little to give appearance of feathers

that we are simply placing like this the instrument and we are giving it shape

so that it does not remain smooth

let's do this procedure in all the body

in the halls we can also do it in this part and on top of

soon we leave it a little bit ready for different textures and in the tail you

we are going to make a small line

and we are going to do own diagonally

A) Yes

and then at the end when we go to paint all these forms are going to

perform

like this if we continue to give texture to the whole body of the parrot

well here I finished giving texture to the whole body look how it looks

Now we must let it dry very well in this part below add two strips

small and carve them a bit like simulating the appearance of wood

we usually take and make some lines in this part I placed four

small four balls and here add a little more cold porcelain for

simulate which are the legs and stands on a branch

so now we let it dry and go to proceed to do the other figures of

the other points good friends now to decorate the part

from here below we are going to take another bit of cold porcelain let's flatten let's

try to make a rectangle although we have approximately one

centimeter thick We are looking at how we look like this now

what we are going to do is flatten the sides

with any instrument that you have in their homes not necessarily

with these that I'm going to use can be with with a spatula with a knife

we try to make a rectangle and now what we are going to do is

try to stretch it in your part of above

we must adjust a bit in the part of down

and we are correcting it to give this shape

they have swollen us a little we can Flatten it again

trying to always go to stay the centimeter of thickness

so now what are we going to do

with a good instrument let's measure it here that we do not miss this strip

coffee on the plate this strip we owe leave free that does not excel either

much of the part of here well already with this piece so then that

let's do is flatten a bit here this edge we can soon mark

an edge approximately well less than one centimeter and we're going to make pressure

plus

that this piece like this

these friends and so we can not

begin to carve play shape to give way to the accordion then

a small brand and I'm going to do another

and in this intermediate we are going to do several slots as well or several brands

who are going to do the form already of the middle part of the accordion

A) Yes

now with another we look for something that we serve to make the keys

they do not have here some keys like piano let's make those keys something like that

this does not have to be so exact that is a simulation and in this

part of here we are going to do with a punch the points

you can get there seeing from soon

over the internet looking at an image of how it's an accordion

something like that everything in the imagination

you can simply guide yourself

after we have this carved then we can proceed to paste it what

we can paste or we can let it dry although it is better to stick it for this

take the form that results from here the dish has a curved shape then

we must stick and ready we can continue giving here for example they open for me

come to mention them like the one that gives thick up here

we can follow the accordion shape above, we will not be left

different

we have the slots here

and then when it dries let's paint

now we apply glue and stick it here always guiding us on the lines

that we have previously marked or less in that in that part

continuing then with the decoration already on this side then we are going to take

again another crohn piece of porcelain or cold porcelain and let's do what

same then more or less giving it a thickness of an equal centimeter

let's flatten a little

and now let's give a way how to a kind of bag

these are some representations characteristics here in my country

This is a a bag or an evil one that they use a lot

in an area determined here in our country in

Colombia here what I'm going to do is try

take out a figure with this straight form up and curved in this part then

we should try not to leave too much big

being very large then

we are accommodating according to the size that we have this long this is going to

do here are going to make several figures those that are going to be in that part

so he has planned

and we are giving this characteristic form so

I think it could be in that size

we can leave it in that size and we are going to start here

on laying

we need more, we add more

a figure that we are going to overcome in this part

then you can make these figures also smaller or they can do it

in agreement and suddenly all characteristic of their

countries you see the most typical of each of

each zone so

here I'm going to get it out like this

for people who want to do this type of

figures

so much with a knife can you help with something that has a point that serves to

cut this is like working with play dough

then as we go working we are giving it the form because when

we make cuts we can go disarming the ready form then here

in this part

I'm working here but then I do not I've stuck it yet it's not just

to see the size we can go giving the form

the mind

we want that if you want to swim what so thick they can do it a little

thinner the important thing is that it has this form

specific and already with these instruments we can go carving

I'm here an edge

he dried himself paint that look that the details are ready

here too

something like that We can not go on

checking to make us look great good after having carved it

then now let's apply the glue

in the back already to fix it let's apply we will sustain a

moment

but we can paste a little more down

we do a little bit of pressure not too much so as not to distort what we are

doing

and now we are going to paste the

the rope that has the or the strip that have the bag then they are

let's try to to apply to all the pyrite

This is the strap of the bag

It is hard work where a little patience they are very thorough that we are

working with with this material that is very flexible then we can be

it moves it can be deforming then we can be constantly

rectifying

ready so let's take care in this part

do not worry because there is glue we can remove it carefully from all

modes the transparent remains then we stick this bag that is

call carry the here in the country it is known as lane and now

I'm going to make a little hat for place it here at the top here

in the part in this part of good now to make the hat we are going to take a

cold porcelain ball let's look at what proportional to the size

of the bag then it's not going to get very big ready to this little ball

Now we are going to start giving you a special way we're going to flatten it in

its base

it's like trying that the planned flattened towards the bottom this

A) Yes after having this we are going to give a

little more of curved shape here in this part of

above taking shape with something can be with a

pen with an instrument as well as this we are going to give a small indentation

on top and we go with the fingers to make pressure to

both sides

to take a form like this

after having this form we go to the bottom part I'm going to

take another little ball to make the wings of the hat

and this then we're going to flatten it

and trying to make us stay providing

this part below is not totally circular is rather an oval shape

so we give a form to the

we have that is living more or less

do not leave us soon to pass the size ready then

more or less so is the size

let's fix some points and if the size is exceeded somewhere

of the hat look here in this part of the base, let's try to let it remain

little oval

already with this form below then let's paste the piece

we'll see a little bit of glue so fix very well

all these pieces we must apply the glue to keep them together

we are going to place like this

that messed us up we try again to give the ready form

and so we are going to give the shape this little hat

since we're going to stick here in this top part

we can place it like this or as if you were hanging

then creativity imagination continuing with the decoration then

first let's dry the hat to later paste because first what

you have to do is paint these pieces then we will leave it aside drying

and now at the top is in the part of the top of the clock then we go

to make another figure again we take that of that land and chrome

that we are going to attach directly today here we are not going to give the form not to stick it

still the shape

then what we are going to do is to plan it a little always

trying that those that more or less of the same thickness of the other pieces

we already know that well in this in that size we will stay

Now let's apply a little bit of glue

this costs figures and we're going to work directly on the plate

of this then

so circular

yes

and trying to clarify a little to the sides

let's take another and this we're going to is a smaller one than

another the flat mos let's try to get a

circumference but we're not going to let it get narrower

to one side and bigger out as if it were a kind of ears

they are really a way out then we are going to paste them in this

part of here

let's do the two sides

in providing or we get the same amount of porcelain so that we have left

more or less proportional of it size

we are also going to paste them

I was bathing the glue a little

in this way one

it's like that and here what we are going to do is a

figure or character called marimón then the base of that face is this

way though actually times in the part right

for the other side but for you to can see is essentially like this from

rest we are going to work is com making pure thin strips to give

the shape of the mouth of the eyes

and also a nose as if it were a kind of elephant nose a horn

we are going to do is do with the small strips

to make the shape of the eyes

obviously we are going to hit it with the glue here I am showing you

well so it's a little faster

the eyes

but as we see well let's make the mouth

all right no one is already a little bigger is a

and bigger more thicker good friends here I've already missed two

days to dry very well these pieces and with this ready we can already

start painting

good friends how could they see then Apply a few bases to pieces ready

black base to the alca rail to the accordion and a yellow base to the macaw and this

piece of cannes and we started painting directly with its original colors

Now what I'm going to do is give a little more color here to the macaw then

let's paint with a color paint bone

let's apply in this part corresponds to the face then we're going to

apply this painting in this little part and we're also going to use this

same color to paint the hat here the hat is also dry

ah let's apply everywhere

We will totally apply it in this colour

soon we need to apply several layers so that the color is more even

then we are going to apply it first base layer and then the others that are going to

go fixing more the color and apart from this we are also going to paint

the black beak the legs that are the toes of the legs and the twig the

let's paint with a chocolate color the friends then these are the

paintings that we are going to use in these other pieces

Y continuing with the parrot now let's go

to paint already red which is the full color that we will use

then we are going to need a brush flat also from bristle a bit hard and

let's use the brush technique dry then we apply paint and go

to download over a cloth

since we downloaded, let's start give past

yes against

of the carving we did in the par this so

we are simply giving brushstrokes

to try to cover the entire surface but then let's stay with those

yellow floors

and we're going to do it for the whole surface for this we are going to

complete everything and then we're going to give another shade with another color

Y after having applied the color red

already in dry brush technique or for that we unload the brush a little, not what

we paint totally then it is enhanced all the all the carving that we did

now let's paint the peak a bit with Bone-colored paint then always

let's do the same we download a little

and we are going to begin to pass and then peak is simply a

part what we are going to paint

it's like the tip up

to enhance this part a bit and nothing plus

A) Yes

and we're also going to take a little to apply on the legs

to carve

in this way we will continue a little in the stick is very good

so we check the carving but speaking as if it's a

a wooden stick

and now what we are going to do is apply a little blue on the wings

in the same way

we unload

the idea is not to download it completely but do not leave the brush so close

and we are going to begin to give brushstrokes

so in different parts randomly

so let's perform a little more the color of the macaw we are going to make these

Macaws that are colored feathers blue

because there are others of other shades we see

also the macaw is colored yellow with blue

then we are going to to highlight this is the most representative

from our country

and so it's just putting a little bit of creativity

I would leave it like that we only need to place the eye

then we can do it with a stick of skewer with the tip we put a

small dot of black

good friends you have finished the macaw look how it was

so now what we are going to do is paint the marimonda that I already started with

an ear it is very easy this character because they are

basic colors and really the ears they go blue

and how they saw the massive face of color Yellow eyes will go red

and the mouth of color that then this is what we are going to do now

ready here I finished painting the marimonda of this simpler character

and also the nose ready then this we're going to paste it once we go

to paste here applying a bit of white glue but for now we're going to

continue with this other figure that is the accordion then let's start with a

flat bristle brush

doing in the same way as we say long ago downloading the brush and what

let's go through the part that makes up the accordion

let's enhance this way

first we do this part and then let's paint with vinotinto color and

this part of here what are these two pieces

good friends to you here can already see how the accordion is playing

they have like enhanced the painting totally the carving here in the bellows part

here this is where the sound will be here now I'm going to paint white on

keyboard look how it looks then First start by applying a soft layer

towards the dry brush technique after with a thin brush he went over again

to reaffirm more the ready tone but so we must always take care that

the brush is not very loaded so that Do not cover in all slots or the

carving that we did now continued applying white paint to the keyboard

good friends here I finished painting the accordion

look then in this part is done with the color white and on this side too

look at how the forms look if they enhance well on the keyboard part

then apply the white paint and here on the edge apply a little more

to give us the feeling here of the other black keys that in this part

that to the part where the air is like this we would have the accordion now

last we will finish painting the lane and this one we're going we're going to use

in brown or chocolate and for apply it first in this part and in

is here

this and so the carrier is already painted this was easier because we had

painted the black base and what it move paint brown in these

two pieces now as we had already painted with

Hat hat predator I applied a bone color I gave several

layers so that the color remained well sign then now what are we going to

to do is to paint the line in black that goes around the hat's outline

so for that we're going to use a triple zero slim brush

and very carefully we will start to paint the fringe

well here I already have all the pieces painted I ended up hitting the hat

currently the only thing that I was missing paste the hat and paste the analysis of

the marimonde on how the characters here is the lane with the

hat and accordion and dad like ready then now what follows is in

this brown strip that we leave we are going to paste numbers

then I bought these numbers are numbers for watch

in any stationery or store crafts can get them with

some numbers that come adhesive then we will start to paste them in

the corresponding site then we start here with the 2 the 3 6 and 9

after having these then we go squared that we are proportional to

the correct distance

these are very simple as they are stickers we are going to stick them like this

we go to paste it where it belongs

then we continue to paste the numbers and then what I'm going to do is apply

a layer of varnish that used a varnish water based very gently let's

pass and varnish all the pieces or if you want to first varnish it and

then place the numbers that if we put it like this before it soon gives us

something more fixation good friends here then I already hit

all the numbers as you can see and varnish on all the good surface of

numbers put simply with a brush on the side let's varnish

directly everything and how it is now let's put the mechanism these

mechanisms they sell them in stationery or craft stores just what

let's introduce in the hole that we already we had done at the beginning

center we are going to keep in mind that let's stay right because according to the

clock position the top part that aligned

with some small pieces that we are going to introduce the easy to assemble brings a

washer and bring a nut ready then

here we go to why we will ensure it

species that we had it insured us we can help with a clamp

we tighten well so you do not go to be moving this part so seen

so at this moment I'm not going to press simply I'm going to show you how

we install them we place them like this and here come the pieces then this

hand that is the short one we are going to enter it first anyway

you can notice it according to the mechanism

to the sizes that come for enter it first then this one that

it's a smaller hole would stay in this part

but we must do with care of not look

damage the pieces

they fit in well and finally the second hand

and in the final part this would stay like that, you know that

we must place the right mechanism and after that we put

good friends, that is how we are ready project as it looks

is all the figures that we elaborate

I hope you liked this project is like this

give me a like and subscribe if not yet they have subscribed is totally free and

activate the bell to get them the notification of each new video that

we are doing thank you very much for accompany me and we see each other here

with more Art in Your Hands

For more infomation >> Reloj en plato de arcilla y porcelana fría - Duration: 58:30.

-------------------------------------------

BTL 93.soi cầu xsmb ngày 14.2.HỘI ĐỒNG SOI CẦU.soi cầu tuyệt mật.soi cau xsmb chinh xac 100.soi cầu - Duration: 7:12.

For more infomation >> BTL 93.soi cầu xsmb ngày 14.2.HỘI ĐỒNG SOI CẦU.soi cầu tuyệt mật.soi cau xsmb chinh xac 100.soi cầu - Duration: 7:12.

-------------------------------------------

Toyota Verso 1.8 VVT-i Sol 7p. - Duration: 1:22.

For more infomation >> Toyota Verso 1.8 VVT-i Sol 7p. - Duration: 1:22.

-------------------------------------------

dieta dos 17 dias dieta 17 dias funciona depoimentos 2019 depoimento 04 - Duration: 4:08.

For more infomation >> dieta dos 17 dias dieta 17 dias funciona depoimentos 2019 depoimento 04 - Duration: 4:08.

-------------------------------------------

"월드클래스" 손흥민 향한 영국 언론의 '칭찬 릴레이' - Duration: 4:32.

도르트문트(독일)를 상대로 유럽 챔피언스리그 16강 1차전에서

골을 터뜨린 손흥민(27·토트넘)을 향한 찬사가 끊이질 않았다.

손흥민은 14일 영국 런던 웸블리 스타디움에서 열린 2018-2019

유럽축구연맹(UEFA) 챔피언스리그 16강 1차전에서 도르트문트를 맞아 후반 2분 선제골을 터뜨렸다.

왼 측면에서 얀 페르통언이 올린 크로스를 페널티 지역 정면에서

논스톱 왼발 슈팅으로 연결해 골문을 시원하게 열어젖혔다.

최근 4경기 연속 골이자 시즌 16호 골(컵 대회 포함)이었다.

특히 챔피언스리그 경기에선 올 시즌 처음 골을 넣었다.

경기가 끝난 뒤 손흥민을 향한 영국 언론의 칭찬 릴레이가 이어졌다.

스카이스포츠는 "(손흥민의 골로) 토트넘의 후반전 시작을 알렸고,

홈 팬들을 함성으로 들썩이게 했다"면서 도르트문트를

상대로 통산 11경기 9골을 넣은 사실도 함께 전했다.

인디펜던트는 "손흥민은 결정적인 수준을 넘어서 월드클래스 수준으로 나아갔다"

고 극찬했고, 데일리메일은 "손흥민의 이번 골은 스트라이커로서 확실히 톱이라는 걸 보여준 것"이라고 평가했다.

텔레그래프는 그룹 비틀즈의 노래인 '히어 컴스 더 선'

을 빗대 '히어 컴스 더 손(Here come the Son)'으로 묘사하면서

"발리킥으로 골을 터뜨리면서 이 경기를 더 빛나게 했다"고 전했다.

익스프레스는 "경쾌한 페이스와 훌륭한 움직임으로 토트넘의

가장 큰 위협적인 존재였다"면서 평점 8점이라는 높은 점수를 부여했다.

For more infomation >> "월드클래스" 손흥민 향한 영국 언론의 '칭찬 릴레이' - Duration: 4:32.

-------------------------------------------

Sydney Australia to host first stop in new sailing event, Team Australia, Tom Slingsby, Nathan Outte - Duration: 8:18.

For more infomation >> Sydney Australia to host first stop in new sailing event, Team Australia, Tom Slingsby, Nathan Outte - Duration: 8:18.

-------------------------------------------

GSE IPTV, How to add IPTV on your Phone device IOS or Android - Duration: 5:14.

For more infomation >> GSE IPTV, How to add IPTV on your Phone device IOS or Android - Duration: 5:14.

-------------------------------------------

2019 President's Frontier Award - Duration: 1:31.

We're standing in the Bloomberg Center for Physics and Astronomy and we're quite excited

because we're about to make the fifth award of the President's Frontier Award.

Today's recipient is Brice Menard.

He is a distinguished scientist who plays all ends of the keyboard.

This is an award that was created by two distinguished alums

to celebrate promising intellectual inquiry in the university

You are someone we're so excited to have as a colleague at Hopkins

and we're really excited to give you

a check for a quarter of a million dollars… and freedom!

To all things astronomically wonderful

Brice has been here long enough to make a tremendous impact on the department.

Really pleased that he got these accolades and they're very well deserved.

Working with Brice is very adventurous, I say.

He likes ideas that are out of the box.

He's brilliant and I knew it.

Absolutely.

His work is outstanding.

Data Science will change how science is done in the future, and Professor Menard represents

the leading edge of that change.

So I spend most of my time studying the universe to extract information,

signals that we have not seen.

To always push the limits of knowledge.

This was totally unexpected and quite an honor.

For more infomation >> 2019 President's Frontier Award - Duration: 1:31.

-------------------------------------------

ザ・フーパーズ(THE HOOPERS) - 「Calc」 - Duration: 3:44.

For more infomation >> ザ・フーパーズ(THE HOOPERS) - 「Calc」 - Duration: 3:44.

-------------------------------------------

[FREE] Kojo Funds x NSG Afroswing Type Beat 2019 - "Darlin" (Prod By ASBØ) - Duration: 3:15.

For more infomation >> [FREE] Kojo Funds x NSG Afroswing Type Beat 2019 - "Darlin" (Prod By ASBØ) - Duration: 3:15.

-------------------------------------------

전쟁사에서 배워보는 2가지 실패사례 (+ 영어표현연습) 생존자편향 - Duration: 5:37.

For more infomation >> 전쟁사에서 배워보는 2가지 실패사례 (+ 영어표현연습) 생존자편향 - Duration: 5:37.